Cisco vWLC
Installation
Virtual Controller Virtual Interfaces
- Management Interface
- Virtual Interface
- Dynamic Interface
- AP Manager Interface
This is port mapping between ESXi 5.5 and Dell Power Edge 1950 Ethernet ports. Please notice this server has 2 embedded ports and 2 ports on duo-ethernet card.
This section provides a sample configuration of the Cisco Catalyst interface connection to the ESXi server for the virtual switch as trunk interface. The management interface can be connected to an access port on the switch.
Following configuratin is on Cisco 2950 switch
interface FastEthernet0/1 description ->pe1950 vmnic0 esxi(vWLC Service Port) switchport access vlan 10 switchport mode access ! interface FastEthernet0/2 description ->pe1950 vmnic2 esxi trunk(vWLC Data Port) switchport trunk allowed vlan 10,1002-1005 switchport mode trunk
Power Edge 1950 rear
+-----------------------------------+---
| |e0| |e1| |Dual-Ethernet-card
|-----------------------------/-----|
| |gb1| |gb2| / |Build-in ethernet ports
+-------/------------------ /-------+---
/ ______________/
/ /
+----/---- /------------------------+
|fa0/1|fa0/2|fa0/3|fa0/4|fa0/5 |Cisco 2950 switch
+-----------------------------------+
vWLC software
You will find a related software on Cisco Virtual Wireless Controller software website.
The latest image:
Description: Cisco Wireless LAN Virtual Controller. Release: 7.6.100.0 Release Date: 20/Dec/2013 File Name: AIR-CTVM-K9-7-6-100-0.aes Size: 141.33 MB (148190536 bytes) MD5 Checksum: 39820e3d58b90be8fb54ec7a247991a9
Latest guest OS *.ova template Description: Cisco Wireless LAN Virtual Controller. Release: 7.6.100.0 Release Date: 20/Dec/2013 File Name: AIR-CTVM-7-6-100-0.ova Size: 177.00 MB (185600000 bytes) MD5 Checksum: 6285134046a869f71be1e24aaf6ceee5
The currently used software is old deferred release 7.3.101.0.