Difference between revisions of "Cisco vWLC"

From Ever changing code
Jump to navigation Jump to search
Line 12: Line 12:
This section provides a sample configuration of the Cisco Catalyst interface connection to the ESXi server for the virtual switch as trunk interface. The management interface can be connected to an access port on the switch.
This section provides a sample configuration of the Cisco Catalyst interface connection to the ESXi server for the virtual switch as trunk interface. The management interface can be connected to an access port on the switch.


  interface GigabitEthernet1/1/2
Following configuratin is on Cisco 2950 switch
   description ESXi Management
 
  interface FastEthernet0/1
   description ->pe1950 esxi service_port (Management)
   switchport access vlan 10
   switchport access vlan 10
   switchport mode access
   switchport mode access
  !
  !
  interface GigabitEthernet1/1/3
  interface FastEthernet0/2
   description ESXi Trunk
   description ->pe1950 esxi trunk
   switchport trunk encapsulation dot1q
  switchport access vlan 10
   switchport trunk allowed vlan 10,1002-1005
   switchport mode trunk
   switchport mode trunk
end


= References =
= References =
*[http://www.cisco.com/en/US/products/ps12723/products_tech_note09186a0080bd2d04.shtml Cisco Virtual Wireless Controller Deployment Guide]
*[http://www.cisco.com/en/US/products/ps12723/products_tech_note09186a0080bd2d04.shtml Cisco Virtual Wireless Controller Deployment Guide]

Revision as of 22:04, 11 February 2014

Installation

Virtual Controller Virtual Interfaces

  • Management Interface
  • Virtual Interface
  • Dynamic Interface
  • AP Manager Interface
Virtual-controller-virtual-interfaces

This is port mapping between ESXi 5.5 and Dell Power Edge 1950 Ethernet ports. Please notice this server has 2 embedded ports and 2 ports on duo-ethernet card.

ESXi-eth-ports-mapping

This section provides a sample configuration of the Cisco Catalyst interface connection to the ESXi server for the virtual switch as trunk interface. The management interface can be connected to an access port on the switch.

Following configuratin is on Cisco 2950 switch

interface FastEthernet0/1
 description ->pe1950 esxi service_port (Management)
 switchport access vlan 10
 switchport mode access
!
interface FastEthernet0/2
 description ->pe1950 esxi trunk
 switchport access vlan 10
 switchport trunk allowed vlan 10,1002-1005
 switchport mode trunk

References