Docker

From Ever changing code
Revision as of 10:07, 31 December 2019 by Pio2pio (talk | contribs) (→‎Pull images)
Jump to navigation Jump to search

Containers taking a world J

Installation

General procedure:

  1. Make sure you don't have docker already installed from your packet manager
  2. The /var/lib/docker may be

To install the latest version of Docker with curl:

curl -sSL https://get.docker.com/ | sh

CentOS

sudo yum install bash-completion bash-completion-extras #optional, requires you log out
sudo yum install -y yum-utils device-mapper-persistent-data lvm2 #utils
sudo yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo #docker-ee.repo for EE edition
                      # --enable docker-ce-{edge|test} #for beta releases
sudo yum update
sudo yum clean all #not sure why this command is here
sudo yum install docker-ce
#old: sudo yum install -y --setopt=obsoletes=0 docker-ce-17.03.1.ce-1.el7.centos docker-ce-selinux-17.03.1.ce-1.el7.centos
sudo systemctl enable docker && sudo systemctl start docker && sudo systemctl status docker
yum-config-manager --disable jenkins #disable source to prevent accidental update ?jenkins?

Ubuntu 16.04, 18.04

# Optional, clear out config files
sudo rm /etc/systemd/system/docker.service.d/docker.conf
sudo rm /etc/systemd/system/docker.service
sudo rm /etc/default/docker #environment file

#New docker package is called now 'docker-ce'
sudo apt-get remove docker docker-engine docker.io docker-ce #start fresh
sudo apt-get install apt-transport-https ca-certificates curl software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
sudo apt-key fingerprint 0EBFCD88 #verify

#add the repository
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" # or {edge|test}
sudo apt-get update
sudo apt-cache madison docker-ce #display available versions
sudo apt-get   install docker-ce=<VERSION>
sudo apt-get   install docker-ce=18.06.0~ce~3-0~ubuntu
sudo apt-mark  hold    docker-ce
sudo apt-mark  showhold # show packages that version upgrade has been put on hold
docker-ce


Example of how to run Jenkins docker image

Add a user to docker group

Add your user to docker group to be able to run docker commands without need of sudo as the docker.socket is owned by group docker.

sudo usermod -aG docker $(whoami)


Reason

[root@piotr]$ ls -al /var/run/docker.sock
srw-rw----. 1 root docker 7 Jan 09:00 docker.sock

HTTP proxy

Configure docker if you run behind a proxy server. In this example CNTLM proxy runs on the host machine listening on localhost:3128. This example overrides the default docker.service file by adding configuration to the Docker systemd service file.

First, create a systemd drop-in directory for the docker service:

sudo mkdir /etc/systemd/system/docker.service.d
sudo vi    /etc/systemd/system/docker.service.d/http-proxy.conf
[Service]
Environment="HTTP_PROXY=http://proxy.example.com:80/"
Environment="HTTP_PROXY=http://172.31.1.1:3128/" #overrides previous entry
Environment="HTTPS_PROXY=http://172.31.1.1:3128/"
# If you have internal Docker registries that you need to contact without proxying you can specify them via the NO_PROXY environment variable
Environment="NO_PROXY=localhost,127.0.0.1,10.6.96.172,proxy.example.com:80"


Flush changes:

$ sudo systemctl daemon-reload

Verify that the configuration has been loaded:

$ systemctl show --property=Environment docker
Environment=HTTP_PROXY=http://proxy.example.com:80/

Restart Docker:

$ sudo systemctl restart docker

Docker create and run, basic options

# It will create a container but won't start it up
docker container create -it --name="my-container" ubuntu:latest /bin/bash
docekr container start my-container

docker run -it --name="mycentos" centos:latest /bin/bash
# -i   :- interactive mode (attach to STDIN)          \command to execute when instantiating container 
# -t   :- attach to the current terminal (sudo TTY)
# -d   :- disconnect mode, daemon mode, detached mode, running the task in the background
# -p   :- publish to host exposed container port [ host_port(8080):container_exposedPort(80) ]
# --rm :- remove container after command has been executed
# --name="name_your_container"

# -e|--env MYVAR=123 exports/passing variable to the container, echo $MYVAR will have a value 123
# --privileged :- option will allow Docker to perform actions normally restricted, 
#                 like binding a device path to an internal container path.

Docker inspect

inspect image

docker image inspect centos:6
docker image inspect centos:6 --format '{{.ContainerConfig.Hostname}}' #just a single value
docker image inspect centos:6 --format '{{json .ContainerConfig}}'     #json key/value output
docker image inspect centos:6 --format '{{.RepoTags}}'                 #shows all associated tags with the image

Using --format is similar to jq

inspect container

Shows current configuration state of a docker container or an image.

docker inspect <container_name> | grep IPAddress
           "SecondaryIPAddresses": null,
           "IPAddress": "172.17.0.3",
                   "IPAddress": "172.17.0.3",

Attach/exec to a docker process

If you are running eg. /bin/bash as a command you can get attached to this running docker process. Note that when you exit the container will stop.

docker attach mycentos


To avoid stopping a container on exit of attach command we can use exec command.

docker exec -it mycentos /bin/bash


Attaching directly to a running container and then exiting the shell will cause the container to stop. Executing another shell in a running container and then exiting that shell will not stop the underlying container process started on instantiation.

Mount directory in container

We can mount host directory into docker container so the content will be available from the container

docker run -it -v /mnt/sdb1:/opt/java pio2pio/java8
# syntax: -v /path/on/host:/path/in/container

Build image

Dockerfile

Each line RUN creates a container so if possible, we should join lines so it ends up with less layers.

$ wget jkd1.8.0_111.tar.gz
$ cat Dockerfile <<- EOF #'<<-' heredoc with '-' minus ignores <tab> indent
ARG TAGVERSION=6                    #only command allowed b4 FROM
FROM ubuntu:${TAGVERSION}
FROM ubuntu:latest                  #defines base image eg. ubuntu:16.04
LABEL maintainer="myname@gmail.com" #key/value pair added to a metadata of the image

ARG ARG1=value1

ENV ENVIRONMENT="prod"
ENV SHARE /usr/local/share  #define env variables with syntax ENV space EnvironmetVariable space Value
ENV JAVA_HOME $SHARE/java

# COPY jkd1.8.0_111.tar.gz /tmp #works only with files, copy a file to container filesystem, here to /tmp
# ADD http://example.com/file.txt
ADD jkd1.8.0_111.tar.gz /  #add files into the image root folder, can add also URLs

# SHELL ["executable","params"] #overrides /bin/sh -c for RUN,CMD, etc..

# Executes commands during build process in a new layer E.g., it is often used for installing software packages
RUN mv /jkd1.8.0_111.tar.gz $JAVA_HOME 
RUN apt-get update
RUN ["apt-get", "update", "-y"] #in json array format, allows to run a commands but does not require shell executable

VOLUME /mymount_point #this command does not mount anything from a host, just creates a mountpoint

EXPOSE 80 #it doesn't automatically map the port to a hosts

#containers usually don't have system maangement eg. systemctl/service/init.d as designed to run as single process
#entry point becomes main command that start the main proces
ENTRYPOINT apachectl "-DFOREGROUND" #think about it as the MAIN_PURPOSE_OF_CONTAINER command. 
# It's always run by default it cannot be overridden

#Single command that will run after the image has been created. Only one per dockerfile, can be overriden.
CMD ["/bin/bash"]

# STOPSIGNAL

EOF

Build

docker build --tag myrepo/java8 .  #-f point to custom Dockerfile name eg. -f Dockerfile2
# myrepo dockerhub username, java8 -image name, 
# .      directory where is the Dockerfile

docker build -t myrepo/java8 . --pull --no-cache --squash
# --pull     regardless a local copy of an image can exist force to download a new image
# --no-cache don't use cache to build, forcing to rebuild all interim containers
# --squash   after the build squash all layers into a single layer. 

docker images             #list images
docker push myrepo/java8 #upload the image to DockerHub repository


squash is enabled only on docker demon with experimental features enabled.

Manage containers and images

Run a container

When you run a container you will create a new container from a image that has been already build/ is available then put in running state

  • -d detached mode, the container will continue to run after the CMD or passed on command exited
  • -i interactive mode, allows you to login in /ssh to the container


# docker container run [OPTIONS]           IMAGE    [COMMAND] [ARG...] # usage
  docker container run -it --name mycentos centos:6 /bin/bash
  docker           run -it pio2pio/java8 #container section command is optional
# -i       :- run in interactive mode, then run command /bin/bash
# --rm     :- will delete container after run
# --publish | -p 80:8080 :- publish exposed container port 80-> to 8080 on the docker-host
# --publish-all | -P     :- publish all exposed container ports to random port >32768

List

ctop #top for containers
docker ps -a #list containers
docker image ls #list images
docker images #short form of the command above
docker images --no-trunc
docker images -q #--quiet
docker images --filer "before=centos:6"

# List exposed ports on a container
docker port CONTAINER [PRIVATE_PORT[/PROTOCOL]]
docker port web2
80/tcp -> 0.0.0.0:81


Search images

docker search ubuntu #search the Docker Hub for images, you need to docker login first
NAME                            DESCRIPTION                                     STARS OFFICIAL   AUTOMATED
ubuntu                          Ubuntu is a Debian-based Linux operating sys…   8206  [OK]       
dorowu/ubuntu-desktop-lxde-vnc  Ubuntu with openssh-server and NoVNC            210              [OK]
rastasheep/ubuntu-sshd          Dockerized SSH service, built on top of offi…   167              [OK]

docker search --filter stars=50 is-official=true apache #search images that have 50 or more stars
docker search --limit 10 apache                         #display top 10 images

Pull images

<name>:<tag>
docker pull hello-world:latest # pull latest
docker pull --all hello-world  # pull all tags
docker pull --disable-content-trust hello-world # disable verification 

docker images --digests #displays sha256: digest of an image

# Dangling images - transitional images

from Amazon ECR

docker login does not support native IAM authentication methods. Therefore use a command below that will retrieve, decode, and convert the authorization token into a pre-generated docker login command.

aws ecr get-login --region region --no-include-email
docker login -u AWS -p **password** https://aws_account_id.dkr.ecr.us-east-1.amazonaws.com # <- output

Save and import image

In course to move a image to another filesystem we can save it into .tar

# Export
docker image save myrepo/centos:v2 > mycentos.v2.tar
tar -tvf mycentos.v2.tar

# Import
docker image import mycentos.v2.tar <new_image_name>

# Load from a stream
docker load < mycentos.v2.tar #or --input mycentos.v2.tar to avoid redirections

Export aka commit container into image

Let's say we wanto modify stock image centos:6 by installing Apache interactivly, set to autostart then export as an new image. Let's do it!

docker pull centos:6
docker container run -it --name apache-centos6 centos:6
# Interactively do: yum -y update; yum install -y httpd; chkconfig httpd on; exit

# Save container changes - option1
docker commit -m "added httpd daemon" -a "Piotr" b237d65fd197 newcentos:withapache #creates new image from a container's changes
docker commit -m "added httpd daemon" -a "Piotr" <container_name> <repo>/<image>:<tag>
# -a :- author

# Save container changes - option2
docker container export apache-centos6 > apache-centos6.tar
docker image     import apache-centos6.tar newcentos:withapache

docker images
REPOSITORY    TAG          IMAGE ID            CREATED             SIZE
newcentos     withapache   ea5215fb46ed        50 seconds ago      272MB

docker image history newcentos:withapache
IMAGE        CREATED        CREATED BY   SIZE   COMMENT
ea5215fb46ed 2 minutes ago               272MB  Imported from -


I am unsure what is a difference in creation of images from a container between:

  • docker container commit
  • docker container export - this seems creates smaller image

Tag images

Tags are used to usually to name Official image with a new name that we are planning to modify. This allows to create a new image, run a new container from a tag, delete the original image without affecting the new image or container started from the new tagged image.

docker image tag #long version
docker tag centos:6 myucentos:v1 #this will create a duplicate of centos:6 named myucentos:v1

Tagging allows to modify repository name and maanges references to images located on a filesystem.

History of an image

We can display history of layers that created the image by showing interim images build in creation order. It shows only layers created on a local filesystem.

docker image history myrepo/centos:v2

Stop and delete all containers

docker stop $(docker ps -aq) && docker rm $(docker ps -aq)

Delete image

$ docker images
REPOSITORY          TAG                 IMAGE ID            CREATED             SIZE
company-repo        0.1.0               f796d7f843cc        About an hour ago   888MB
<none>              <none>              04fbac2fdf48        3 hours ago         565MB
ubuntu              16.04               7aa3602ab41e        3 weeks ago         115MB

# Delete image
$ docker rmi company-repo:0.1.0
Untagged: company-repo:0.1.0
Deleted: sha256:e5cca6a080a5c65eacff98e1b17eeb7be02651849b431b46b074899c088bd42a
..
Deleted: sha256:bc7cda232a2319578324aae620c4537938743e46081955c4dd0743a89e9e8183

# Prune image - delete dangling (temp/interim) images. 
# These are not associated with end-product image or containers.
docker image prune
docker image prune -a #remove all images not associated with any container

Cleaning up space by removing docker objects

This applied both to docker container and swarm systems.

docker system df     #show disk usage
TYPE                TOTAL               ACTIVE              SIZE                RECLAIMABLE
Images              1                   0                   131.7MB             131.7MB (100%)
Containers          0                   0                   0B                  0B
Local Volumes       0                   0                   0B                  0B
Build Cache         0                   0                   0B                  0B

docker network ls #note all networks below are system created, so won't get removed
NETWORK ID          NAME                DRIVER              SCOPE
452b1c428209        bridge              bridge              local
528db1bf80f1        docker_gwbridge     bridge              local
832c8c6d73a5        host                host                local
t8jxy5vsy5on        ingress             overlay             swarm
815a9c2c4005        none                null                local

docker system prune #removes objects created by a user only, on the current node only
                    #add --volumes to remove them as well
WARNING! This will remove:
        - all stopped containers
        - all networks not used by at least one container
        - all dangling images
        - all dangling build cache
Are you sure you want to continue? [y/N]

docker system prune -a --volumes #remove all

Docker Volumes

Docker's 'copy-on-write' philosophy drives both performance and efficiency. It's only the top layer that is writable and it's a delta of underlying layer.

Volumes can be mounted to your container instances from your underlying host systems.

_data volumes, since they are not controlled by the storage driver (since they represent a file/directory on the host filesystem /var/lib/docker), are able to bypass the storage driver. As a result, their contents are not affected when a container is removed.

Volumes are data mounts created on a host in /var/lib/docker/volumes/ directory and refereed by name in a Dockerfile.

docker volume ls                   #list volumes created by VOLUME directive in a Dockerfile
sudo tree /var/lib/docker/volumes/ #list volumes on host-side
docker volume create  my-vol-1
docker volume inspect my-vol-1
[
    {
        "CreatedAt": "2019-01-17T08:47:01Z",
        "Driver": "local",
        "Labels": {},
        "Mountpoint": "/var/lib/docker/volumes/my-vol-1/_data",
        "Name": "my-vol-1",
        "Options": {},
        "Scope": "local"
    }
]


Using volumes with Swarm services

docker container run  --name web1 -p 80:80 --mount source=my-vol-1,target=/internal-mount --replicas 3 httpd #container
docker service create --name web1 -p 80:80 --mount source=my-vol-1,target=/internal-mount --replicas 3 httpd #swarm service
# --mount --volumes|-v is not supported with services, this will replicate volumes across swarm when needed,
# but it will not replicate files

docker exec -it web1 /bin/bash #connect to the container
roor@c123:/ echo "Created when connected to container: volume-web1" > /internal-mount/local.txt; exit

# prove the file is on a host filesystem created volume
user@dockerhost$ cat /var/lib/docker/volumes/my-vol-1/_data/local.txt


Host storage mount

Bind mapping is binding host filesystem directory to a container directory. It's not mouting volume that it'd require a mount point and volume on a host.

mkdir /home/user/web1
echo "web1 index" > /home/user/web1/index.html
docker container run -d --name testweb -p 80:80 --mount type=bind,source=/home/user/web1,target=/usr/local/apache2/htdocs httpd
curl http://localhost:80

Removing service is not going to remove the volume unless you delete the volume itself. It that case will be removed from all swarms.

Networking

Container Network Model

It's a concept of network implementation that is built on multiple private networks across multiple hosts overlayed and managed by IPAM. Protocol that keeps track and provision addesses.

Main 3 components:

  • sandbox - contains the configuration of a container's network stack, incl. management of interfaces, routing and DNS. An implementation of a Sandbox could be a eg. Linux Network Namespace. A Sandbox may contain many endpoints from multiple networks.
  • endpoint - joins a Sandbox to a Network. Interfaces, switches, ports, etc and belong to only one network at the time. The Endpoint construct exists so the actual connection to the network can be abstracted away from the application. This helps maintain portability.
  • network - a clollection of endpoints that can communicate directly (bridges, VLANs, etc.) and can consist of 1toN endpoints


Container Network Model
IPAM (Internet Protocol Address Management)

Managing addesees across multiple hosts on a separate physical networks while providing routing to the underlaying swarm networks externally is the IPAM prblem for Docker. Depends on the netwok driver choice, IPAM is handled at different layers in the stack. Network drivers enable IPAM through DHCP drivers or plugin drivers so the complex implementation that would be normally overlapping addesses is supported.

References

Publish exposed container/service ports

Publishing modes
host
set using --publish mode=host,8080:80, makes ports available only on the undelaying host system not outside the host the service may exist; defits routing mesh so user is responsible for routing
ingress
responsible for routing mesh makes sure all published ports are avaialble on all hosts in the swarm cluster regardless is a service replica running on it or not


# List exposed ports on a container
docker port CONTAINER [PRIVATE_PORT[/PROTOCOL]]
docker port web2
80/tcp -> 0.0.0.0:81

# Publish port
                                          host  :  container
                                             \  :  /
docker container run -d --name web1 --publish 81:80 httpd
# --publish | -p :- publish to host exposed container port
# 81             :- port on a host, can use range eg. 81-85, so based on port availability port will be used
# 80             :- exposed port on a container

ss -lnt
State       Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN      0      100        127.0.0.1:25              *:*
LISTEN      0      128                *:22              *:*
LISTEN      0      100              ::1:25             :::*
LISTEN      0      128               :::81             :::*
LISTEN      0      128               :::22             :::*

docker container run -d --name web1 --publish-all 81:80 httpd
# --publish-all | -P publish all cotainer exposed ports to random ports above >32768
CONTAINER ID IMAGE COMMAND              CREATED STATUS PORTS                   NAMES
c63efe9cbb94 httpd "httpd-foreground"   2 sec.. Up 1 s 80/tcp                  testweb  #port exposed but not published
cb0711134eb5 httpd "httpd-foreground"   4 sec.. Up 2 s 0.0.0.0:32769->80/tcp   testweb1 #port exposed and published to host:32769

Network drivers

Default network for a single host docker-host is bridge network.

List of Native (part of Docker Engine) Network Drivers
bridge
default on stand-alone hosts, it's private network internal to the host system, all containers on this host using Bridge network can communicate, external access is granted by port exposure or static-routes added with teh host as the gateway for that network
none
used when a container does not need any networkng, still can be accessed from the host using docker attach [containerID] or docker exec -it [containerID] commands
host
aka Host Only Networking, only accessable via underlaying host, access to services can be provided by exposing ports to the host system
overlay
swarm scope driver, allows communication to all Docker Daemons in a cluster, self-extending if needed, maanged by Swarm manager, it's default mode of Swarm communication
ingress
extended network across all nodes in the cluster; special overlay network that load balances netowrk traffic amongst a given service's working nodes; maintains a list of all IP addresses from nodes that participate in that service (using the IPVS module) and when a request comes in, routes to one of them for the indicated service; provides routing mesh' that allows services to be exposed to the external network without having replica running on every node in the Swarm
docker gateway bridge
special bridge network that allows overlay networks (incl. ingress) access an individual DOcker daemon's physical network; every container run within a service is connected to the local Docerk daemon's host network; automatically created when Docker is initialised or joined by docker swarm init or docker join commands.
Docker interfaces
  • docker0 - adapter is installed by default during Docker setup and will be assigned an address range that will determine the local host IPs available to the containers running on it
Create bridge network
docker network ls #default networks list
NETWORK ID    NAME                DRIVER   SCOPE
130833da0920  bridge              bridge   local
528db1bf80f1  docker_gwbridge     bridge   local
832c8c6d73a5  host                host     local
t8jxy5vsy5on  ingress             overlay  swarm  #'ingress' special network 1 per cluster
815a9c2c4005  none                null     local

docker network inspect bridge #bridge is a default network containers are deployed to

docker container run  -d web1 -p 8080:80 httpd #expose container port :80 -> :8080 on the docker-home
docker container inspect web1 | grep IPAdd
docker container inspect --format="{{.NetworkSettings.Networks.bridge.IPAddress}}" web1 #get container ip
curl http://$(IPAddr)


Create bridge network
docker network create --driver=bridge --subnet=192.168.1.0/24 --opt "com.docker.network.driver.mtu"=1501 deviceeth0

docker network ls
docker network inspect deviceeth0


Create overlay network
docker network create --driver=overlay --subnet=192.168.1.0/24 --gateway=192.168.1.1 overlay0
docker network ls 
NETWORK ID          NAME                DRIVER              SCOPE
130833da0920        bridge              bridge              local
528db1bf80f1        docker_gwbridge     bridge              local
832c8c6d73a5        host                host                local
t8jxy5vsy5on        ingress             overlay             swarm
815a9c2c4005        none                null                local
2x6bq1czzdc1        overlay0            overlay             swarm


Inspect network
docker network inspect overlay0
[
    {
        "Name": "overlay0",
        "Id": "2x6bq1czzdc102sl6ge7gpm3w",
        "Created": "2019-01-19T11:24:02.146339562Z",
        "Scope": "swarm",
        "Driver": "overlay",
        "EnableIPv6": false,
        "IPAM": {
            "Driver": "default",
            "Options": null,
            "Config": [
                {
                    "Subnet": "192.168.1.0/24",
                    "Gateway": "192.168.1.1"
                }
            ]
        },
        "Internal": false,
        "Attachable": false,
        "Ingress": false,
        "ConfigFrom": {
            "Network": ""
        },
        "ConfigOnly": false,
        "Containers": null,
        "Options": {
            "com.docker.network.driver.overlay.vxlanid_list": "4097"
        },
        "Labels": null
    }
]


Inspect container network
docker container inspect testweb --format {{.HostConfig.NetworkMode}}
overlay0
docker container inspect testweb --format {{.NetworkSettings.Networks.dev_bridge.IPAddress}}
192.168.1.3


Connect/disconnect from a network can be done when a container is running. Connect won't disconnect from a current network.

docker network connect --ip=192.168.1.10 deviceeth0 web1
docker container inspect --format="{{.NetworkSettings.Networks.bridge.IPAddress}}" web1
docker container inspect --format="{{.NetworkSettings.Networks.deviceeth0.IPAddress}}" web1
curl http://$(IPAddr)
docker network disconnect deviceeth0 web1

Overlay network in Swarm cluster

Overlay network can be created/removed/updated like any other docker objects. It allows inter-service(containers) communication, where --gateway ip address is used to reach to outside eg. Inernet or the host network. When creating the overlay network on the manager host it will get recreated on worker nodes only when is referenced by any service that is using it. See below.

swarm-mgr$ docker network create --driver=overlay --subnet=192.168.1.0/24 --gateway=192.168.1.1 overlay0
swarm-mgr$ docker service create --name web1 -p 8080:80 --network=overlay0 --replicas 2 httpd
uvxymzdkcfwvs2oznbnk7nv03
overall progress: 2 out of 2 tasks 
1/2: running   [==================================================>] 
2/2: running   [==================================================>] 

swarm-wkr$ docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
ba175ebd2a6f        bridge              bridge              local
a5848f607d8c        docker_gwbridge     bridge              local
fccfb9c1fdc3        host                host                local
t8jxy5vsy5on        ingress             overlay             swarm
127b10783faa        none                null                local
2x6bq1czzdc1        overlay0            overlay             swarm

# remove network, only affected newly created servces not the running onces
swarm-mgr$ docker service update --network-rm=overlay0 web1


DNS

docker container run -d --name testweb1 -P --dns=8.8.8.8 \
                                           --dns=8.8.4.4 \
                                           --dns-search "mydomain.local" \
                                           httpd
# -P :- publish-all exposed ports to random port >32768

docker container exec -it testweb1 /bin/bash -c 'cat /etc/resolv.conf'
search us-east-2.compute.internal
nameserver 8.8.8.8
nameserver 8.8.4.4

# System wide settings, requires docker.service restart
cat > /etc/docker/daemon.json <<EOF
{ 
  "dns": ["8.8.8.8", "8.8.4.4"]
}
EOF
sudo systemctl restart docker.service #required

Examples

Default project

As good practice all Docker files should be source controlled. The basic self explanatory structure can looks like below, and skeleton be created with a commend below:

mkdir APROJECT && d=$_; touch $d/{build.sh,run.sh,Dockerfile,README.md,VERSION};mkdir $d/assets; touch $_/{entrypoint.sh,install.sh}

└── APROJECT
    ├── assets
    │   ├── entrypoint.sh
    │   └── install.sh
    ├── build.sh
    ├── Dockerfile
    ├── README.md
    └── VERSION

Dockerfile

Dockerfile it is simply a build file.

Semantics

ENTRYPOINT
Container config: what to start when this image is ran

User management

RUN addgroup --gid 1001 jenkins -q
RUN adduser  --gid 1001 --home /tank --disabled-password --gecos '' --uid 1001 jenkins
# --gid add user to group 1001
# --gecos parameter is used to set the additional information. In this case it is just empty.
# --disabled-password it's like  --disabled-login,  but  logins  are still possible (for example using SSH RSA keys) but not using password authentication
USER jenkins:jenkins #sets user for next RUN, CMD and ENTRYPOINT command
WORKDIR /tank #changes cwd for next RUN, CMD, ENTRYPOINT, COPY and ADD

Multiple stage build

Introduced in Docker 17.06, allows to use multiple FROM statements allowing for multi stage builds.

FROM microsoft/aspnetcore-build AS build-env
WORKDIR /app

# copy csproj and restore as distinct layers
COPY *.csproj ./
RUN dotnet restore

# copy everything else and build
COPY . ./
RUN dotnet publish -c Release -o output

# build runtime image
FROM microsoft/aspnetcore
WORKDIR /app
COPY --from=build-env /app/output .   #multi stage: copy files from previous container [as build-env]
ENTRYPOINT ["dotnet", "LetsKube.dll"]

Squash an image

Docker uses Union filesystem that allows multiple volumes (layers) to share common and override changes by applying them on top layer. There is no official way to flatten layers to a single storage layer or minimize an image size (2017). Below it's just practical approach.

  1. Start container from an image
  2. Export a container to .tar with all it's file systems
  3. Import container with new image name


Once the process completes and original image gets deleted the new image docker image history command will show only one layer. Often the image will be smaller.

# run a container from an image
docker run myweb:v3
# export container to .tar
docker export <contr_name> > myweb.v3.tar
docker save   <image id>   > image.tar #not verified command
docker import myweb.v3.tar   myweb:v4
docker load   myweb.v3.tar             #not verified command
Resources

Gracefully stop / kill a container

all below are only notes

Trap ctrl_c then kill/rm container.

  • --init
  • --sig-proxy this only works when --tty=false but by default is true

Proxy

If you are behind corporate proxy, you should use Docker client ~/.docker/config.json config file. It requires Docker 17.07 minimum version.

{
 "proxies":
 {
   "default":
   {
     "httpProxy": "http://10.0.0.1:3128",
     "httpsProxy": "http://10.0.0.1:3128",
     "noProxy": "localhost,127.0.0.1,*.test.example.com,.example2.com"
   }
 }
}

More you can find here

Insecure proxy

These can be added to different places, the order is based on latest practices and versioning

docker-ce 18.6
{
    "insecure-registries" : [ "localhost:443","10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16" ]
}
sudo systemctl daemon-reload
sudo systemctl restart docker
sudo systemctl show docker | grep Env
docker info #check Insecure Registries
Using environment file, prior version 18
$ sudo vi /etc/default/docker
DOCKER_HOME='--graph=/tank/docker'
DOCKER_GROUP='--group=docker'
DOCKER_LOG_DRIVER='--log-driver=json-file'
DOCKER_STORAGE_DRIVER='--storage-driver=btrfs'
DOCKER_ICC='--icc=false'
DOCKER_IPMASQ='--ip-masq=true'
DOCKER_IPTABLES='--iptables=true'
DOCKER_IPFORWARD='--ip-forward=true'
DOCKER_ADDRESSES='--host=unix:///var/run/docker.sock'
DOCKER_INSECURE_REGISTRIES='--insecure-registry 10.0.0.0/8 --insecure-registry 172.16.0.0/12 --insecure-registry 192.168.0.0/16'
DOCKER_OPTS="${DOCKER_HOME} ${DOCKER_GROUP} ${DOCKER_LOG_DRIVER} ${DOCKER_STORAGE_DRIVER} ${DOCKER_ICC} ${DOCKER_IPMASQ} ${DOCKER_IPTABLES} ${DOCKER_IPFORWARD} ${DOCKER_ADDRESSES} ${DOCKER_INSECURE_REGISTRIES}"

$ sudo vi /etc/systemd/system/docker.service.d/docker.conf
[Service]
EnvironmentFile=-/etc/default/docker
ExecStart=/usr/bin/dockerd $DOCKER_HOME $DOCKER_GROUP $DOCKER_LOG_DRIVER $DOCKER_STORAGE_DRIVER $DOCKER_ICC $DOCKER_IPMASQ $DOCKER_IPTABLES $DOCKER_IPFORWARD $DOCKER_ADDRESSES $DOCKER_INSECURE_REGISTRIES

$ sudo vi /etc/systemd/system/docker.service
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target docker.socket firewalld.service
Wants=network-online.target
Requires=docker.socket

[Service]
EnvironmentFile=-/etc/default/docker
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
ExecStart=/usr/bin/dockerd -H fd://
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=1048576
# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNPROC=infinity
LimitCORE=infinity
# Uncomment TasksMax if your systemd version supports it.
# Only systemd 226 and above support this version.
TasksMax=infinity
TimeoutStartSec=0
# set delegate yes so that systemd does not reset the cgroups of docker containers
Delegate=yes
# kill only the docker process, not all processes in the cgroup
KillMode=process
# restart the docker process if it exits prematurely
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target

Run docker without sudo

Adding a user to docker group should be sufficient. However on apparmor, SELinux or a filesystem with ACL enabled additional permissions might be required in respect to access a socket file.

$ ll /var/run/docker.sock
srw-rw---- 1 root docker 0 Sep  6 12:31 /var/run/docker.sock=
# ACL
$ sudo getfacl /var/run/docker.sock
getfacl: Removing leading '/' from absolute path names
# file: var/run/docker.sock
# owner: root
# group: docker
user::rw-
group::rw-
other::---

# Grant ACL to jenkns user
$ sudo setfacl -m user:username:rw /var/run/docker.sock

$ sudo getfacl /var/run/docker.sock
getfacl: Removing leading '/' from absolute path names
# file: var/run/docker.sock
# owner: root
# group: docker
user::rw-
user:jenkins:rw-
group::rw-
mask::rw-
other::---
References

References

Docker Enterprise Edition

Components:

  • Docker daemon (fka "Engine")
  • Docker Trusted Registry (DTR)
  • Docker Universal Control Plane (UCP)

Docker Swarm

Swarm - sizing

Universal Control Plane (UCP)

This is for only Enterpsise Edition

  • ports managers, workers in/out

Hardware requirments:

  • 8gb RAM for managers or DTR Docker Trsuted Registry
  • 4gb RAM for workers
  • 3gb free space


Performance Consideration (Timing)

Component                              Timeout(ms)  Configurable
Raft consensus between manager nodes   3000         no
Gossip protocol for overlay networking 5000         no
etcd                                   500          yes
RethinkDB                              10000        no
Stand-alone swarm                      90000        no


Compatibility Docker EE

  • Docker Engine 17.06+
  • DTR 2.3+
  • UCP 2.2+

Swarm with single host manager

# Initialise Swarm
docker swarm init --advertise-addr 172.31.16.10 #Iyou get SWMTKN-token
To add a worker to this swarm, run the following command:
    docker swarm join --token SWMTKN-1-1i2v91qbj0pg88dxld15vpx3e74qm5clk7xkcrg6j3xknedqui-dh60f4j09itiqjfhqa196ufvo 172.31.16.10:2377
To add a manager to this swarm, run 'docker swarm join-token manager' and follow the instructions.

# Join tokens
docker swarm join-token manager #display manager join-token, run on manager
docker swarm join-token worker  #display worker  join-token, run on manager

# Join worker, run new-worker-node
#                                 ->            swarm cluster id                    <-> this part is mgr/wkr <- -> mgr node <-
docker swarm join --token SWMTKN-1-1i2v91qbj0pg88dxld15vpx3e74qm5clk7xkcrg6j3xknedqui-dh60f4j09itiqjfhqa196ufvo 172.31.16.10:2377

# Join another manager, run on new-manager-node
docker swarm join-token manager #run on primary manager if you wish add another manager
# in output you get a token. You notice that 1st part up to dash identifies Swarm cluster and the other part is role id.

# join to swarm (cluster), token will identify a role in the cluster manager or worker
docker swarm join --token SWMTKN-xxxx
docker swarm join --token SWMTKN-1-1i2v91qbj0pg88dxld15vpx3e74qm5clk7xkcrg6j3xknedqui-dh60f4j09itiqjfhqa196ufvo 172.31.16.10:2377
This node joined a swarm as a worker.


Check Swarm status

docker node ls
[cloud_user@ip-172-31-16-10 swarm-manager]$ docker node ls
ID                            HOSTNAME                          STATUS   AVAILABILITY MANAGER STATUS ENGINE VERSION
641bfndn49b1i1dj17s8cirgw *   ip-172-31-16-10.mylabserver.com   Ready    Active       Leader         18.09.0
vlw7te728z7bvd7ulb3hn08am     ip-172-31-16-94.mylabserver.com   Ready    Active                      18.09.0

docker system info | grep -A 7 Swarm
Swarm: active
 NodeID: 641bfndn49b1i1dj17s8cirgw
 Is Manager: true
 ClusterID: 4jqxdmfd0w5pc4if4fskgd5nq
 Managers: 1
 Nodes: 2
 Default Address Pool: 10.0.0.0/8  
 SubnetSize: 24
Troubleshooting
sudo systemctl disable firewalld && sudo systemctl stop firewalld # CentOS
sudo -i; printf "\n10.0.0.11 mgr01\n10.0.0.12 node01\n" >> /etc/hosts # Add nodes to hosts file; exit

Swarm cluster

docker node update -availability drain [node] #drain services for Manager Only nodes
docker service update --force [service_name]  #force re-balance services across cluster

docker swarm leave #node leaves a cluster

Locking / unlocking swarm cluster

Logs used by Swarm manager are encrypted on disk. Access to nodes gives access to keys that encrypt them. It further protects cluster as requires a unlocking key when restarting manager/nodes.

docker swarm init   --auto-lock=true #initialize with 
docker swarm update --auto-lock=true #update current swarm
# both will produce unlock token STKxxx
docker swarm unlock #it'll ask for the unlock token
docker swarm update --auto-lock=false #disable key locking


If you have access to a manager you can always get unlock key using:

docker swarm unlock-key

Key management

docker swarm unlock-key --rotate #could be in a cron

Backup and restore swarm cluster

This priocess describes how to backup whole cluster configuration so can be restored on a new set of servers.

Create docker apps running across swarm

docker service create --name bkweb --publish 80:80 --replicas 2 httpd
$ docker service ls
ID           NAME      MODE          REPLICAS  IMAGE         PORTS
q9jki3n2hffm bkweb     replicated    2/2       httpd:latest  *:80->80/tcp

$ docker service ps bkweb #note containers run on 2 different nodes
ID           NAME      IMAGE         NODE                      DESIRED STATE CURRENT STATE          
j964jm1lq3q5 bkweb.1   httpd:latest  server2c.mylabserver.com  Running       Running about a minute ago
jpjx3mk7hhm0 bkweb.2   httpd:latest  server1c.mylabserver.com  Running       Running about a minute ago
Backup state files
sudo -i
cd /var/lib/docker/swarm
cat docker-state.json #contains info about managers, workers, certificates, etc..
cat state.json
sudo systemctl stop docker.service

# Backup swarm cluster, this file can be then used to recover whole swarm cluster on another set of servers
sudo tar -czvf swarm.tar.gz /var/lib/docker/swarm/

#the running docker containers should be brought up as they were before stopping the service
systemctl start docker

Recover using swarm.tar backup

# scp swarm.tar to recovery node - what it'd be a node with just installed docker
sudo rm -rf /var/lib/docker/swarm
sudo systemctl stop docker

# Option1 untar directly
sudo tar -xzvf swarm.tar.gz -C /var/lib/docker/swarm

# Option2 copy recursivly, -f override if a file exists
tar -xzvf swarm.tar.gz; cd /var/lib/docker
cp -rf swarm/ /var/lib/docker/

sudo systemctl start docker
docker swarm init --force-new-cluster # produces the exactly same token
# you should join all required nodes to new manager ip
# scale services down to 1, then scale up so get distributed to other nodes

Run containers as a services

Docker container has a number limitation therefore running as a service where Cluster Manager: Swarm or Kubernetes manages networking, access, loadbalancing etc.. is a way to scale with ease. The service is using eg. mesh routing to deal with access to containers.

Swarm nodes setup 1 manager and 2 workers

ID                            HOSTNAME                          STATUS AVAILABILITY MANAGER STATUS ENGINE VERSION
641bfndn49b1i1dj17s8cirgw *   swarm-mgr-1.example.com   Ready   Active Leader       18.09.1
vlw7te728z7bvd7ulb3hn08am     swarm-wkr-1.example.com   Ready   Active              18.09.1
r8h7xmevue9v2mgysmld59py2     swarm-wkr-2.example.com   Ready   Active              18.09.0


Create and run a service

docekr pull httpd
docker service create --name serviceweb --publish 80:80 httpd
# --publish|-p -expose a port on all containers in the running cluster

docker service ls
ID                  NAME                MODE                REPLICAS            IMAGE               PORTS
vt0ftkifbd84        serviceweb          replicated          1/1                 httpd:latest        *:80->80/tcp

docker service ps serviceweb #show nodes that a container is running on, here on mgr-1 node
ID           NAME         IMAGE        NODE                    DESIRED STATE CURRENT STATE  ERROR  PORTS
e6rx3tzgp1e5 serviceweb.1 httpd:latest swarm-mgr-1.example.com Running       Running about


When running as a service even if a container runs on a single node (replica=1) the container can be accessed from any of swarm nodes. It's because service exposed port has been exposed to extended mesh private network that the container is running on.

[user@swarm-mgr-1 ~]$ curl -k http://swarm-mgr-1.example.com
  <html><body><h1>It works!</h1></body></html>
[user@swarm-mgr-1 ~]$ curl -k http://swarm-wkr-1.example.com
  <html><body><h1>It works!</h1></body></html>
[user@swarm-mgr-1 ~]$ curl -k http://swarm-wkr-2.example.com
  <html><body><h1>It works!</h1></body></html>


Service update, can be done to limits, volumes, env-variables and more...

docker service scale devweb=3                 #or
docker service update --replicas 3 serviceweb #--detach=false shows visual progress in older versions, default in v18.06
serviceweb
overall progress: 3 out of 3 tasks 
1/3: running   [==================================================>] 
2/3: running   [==================================================>] 
3/3: running   [==================================================>] 
verify: Service converged 

# Limits(soft limit) and reservations(hard limit), this causes to start new services(containers)
docker service update --limit-cpu=.5 --reserve-cpu=.75 --limit-memory=128m --reserve-memory=256m serviceweb

Templating service names

This allows to control eg. hostname in a cluster. Useful for big clusters to easier identify services where they run from hostname.

docker service create --name web --hostname"{{.Node.ID}}-{{.Service.Name}}" httpd
docker service ps --no-trunc web
docker inspect --format="{{}.Config.Hostname}" web.1.ab10_serviceID_cd
aa_nodeID_bb-web

Node lables for task/service placement

docker node ls
ID                            HOSTNAME                  STATUS AVAILABILITY        MANAGER STATUS      ENGINE VERSION
641bfndn49b1i1dj17s8cirgw *   swarm-mgr-1.example.com   Ready  Active              Leader              18.09.1
vlw7te728z7bvd7ulb3hn08am     swarm-wkr-1.example.com   Ready  Active                                  18.09.1
r8h7xmevue9v2mgysmld59py2     swarm-wkr-2.example.com   Ready  Active                                  18.09.1

docker node inspect 641bfndn49b1i1dj17s8cirgw --pretty
ID:                     641bfndn49b1i1dj17s8cirgw
Hostname:               swarm-mgr-1.example.com 
Joined at:              2019-01-08 12:16:56.277717163 +0000 utc
Status:
 State:                 Ready
 Availability:          Active
 Address:               172.31.10.10
Manager Status:
 Address:               172.31.10.10:2377
 Raft Status:           Reachable
 Leader:                Yes
Platform:
 Operating System:      linux
 Architecture:          x86_64
Resources:
 CPUs:                  2
 Memory:                3.699GiB
Plugins:
 Log:           awslogs, fluentd, gcplogs, gelf, journald, json-file, local, logentries, splunk, syslog
 Network:               bridge, host, macvlan, null, overlay
 Volume:                local
Engine Version:         18.09.1
TLS Info:
 TrustRoot:
-----BEGIN CERTIFICATE-----
MIIBajCCARCgAwIBAgIUKXz3wtc8OA8uzTo1pO86ko+PB+EwCgYIKoZIzj0EAwIw
..
-----END CERTIFICATE-----
 Issuer Subject:        MBMxETAPBgNVBAMTCHN3YX.....h
 Issuer Public Key:     MFkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDQgAEy......==


Apply label to a node

docker node update --label-add node-env=testnode r8h7xmevue9v2mgysmld59py2
docker node inspect r8h7xmevue9v2mgysmld59py2 --pretty | grep -B1 -A2 Labels
ID:                     r8h7xmevue9v2mgysmld59py2
Labels:
 - node-env=testnode
Hostname:               swarm-wkr-1.example.com


How to use it. Run a service with --constraint option that pins services to run on a node meeting given criteria. In our case to run on a node where node.labels.node-env == testnode. Note that all replicas are running on the same node unlike they'd be distributed across the cluster.

docker service create --name constraints -p 80:80 --constraint 'node.labels.node-env == testnode' --replicas 3 httpd #node.role, node.id, node.hostname
zrk15vfdaitc1rvw9wqh2s0ot
overall progress: 3 out of 3 tasks 
1/3: running   [==================================================>] 
2/3: running   [==================================================>] 
3/3: running   [==================================================>] 
verify: Service converged 
[cloud_user@mrpiotrpawlak1c ~]$ docker service ls
ID           NAME          MODE         REPLICAS IMAGE         PORTS
zrk15vfdaitc constraints   replicated   3/3      httpd:latest  *:80->80/tcp

[user@swarm-wkr-2 ~]$ docker service ps constraints
ID           NAME          IMAGE        NODE                      DESIRED STATE       CURRENT STATE            ERROR               PORTS
y5z4mt99uzpo constraints.1 httpd:latest swarm-wkr-2.example.com   Running Running 41 seconds ago                       
zqbn4ips969q constraints.2 httpd:latest swarm-wkr-2.example.com   Running Running 41 seconds ago                       
vnb10jcs2915 constraints.3 httpd:latest swarm-wkr-2.example.com   Running Running 41 seconds ago

Scaling services

These commands be issued on a manager node

docker pull docker nginx
docker service create --name web --publish 80:80 httpd
docker service ps web                  #there is only 1 replica
docker service update --replicas 3 web #update to 3 replicas
docker service create --name nginx --publish 5901:80 nginx
elinks http://swarm-mgr-1.com:5901     #nginx website will be presented

# scale is equivalent to update --replicas command for a single or multiple services
docker service scale web=3 nginx=3
docker service ls

Replicated services vs global services

Global Replicated
mode runs at least one copy of a service on each swarm node, even if you join another node the service will coverage there as well. In global mode you cannot use update --replicats or scale commands. It is not possible to update the mode type.
Replicated mode
allows for grater control and flexibility of running number of services.
# creates a single service running across whole cluster in replicated mode
docker service create --name web --publish 80:80 httpd

# run in a global node
docker service create --name web --publish 5901:80 --mode global httpd
docker service ls #note distinct mode names: global and replicated

Docker compose and deploy to Swarm

Install

sudo yum install epel
sudo yum install pip
sudo pip install --upgrade pip
# install docker CE or EE to avoid Python libs conflits
sudo pip install docker-compose

# Troubleshooting
## Err: Cannot uninstall 'requests'. It is a distutils installed project...
pip install --ignore-installed requests

Dockerfile

cat >Dockerfile <<EOF
FROM centos:latest
RUN yum install -y httpd
RUN echo "Website1" >> /var/www/html/index.html
EXPOSE 80
ENTRYPOINT apachectl -DFOREGROUND
EOF


Docker compose file

cat >docker-compose.yml <<EOF
version: '3'
services:
  apiweb1:
    image: httpd_1:v1
    build: .
    ports:
      - "81:80"
  apiweb2:
    image: httpd_1:v1
    ports:
      - "82:80"
  load-balancer:
    image: nginx:latest
    ports:
      - "80:80"
EOF


Run docker compose, on the current node only

docker-compose up -d
WARNING: The Docker Engine you're using is running in swarm mode.
Compose does not use swarm mode to deploy services to multiple nodes in a swarm. All containers will be scheduled on the current node.
To deploy your application across the swarm, use `docker stack deploy`.
Creating compose_apiweb2_1       ... done
Creating compose_apiweb1_1       ... done
Creating compose_load-balancer_1 ... done

docker ps
CONTAINER ID IMAGE        COMMAND                 CREATED  STATUS   PORTS              NAMES
14f8b6b10c2d nginx:latest "nginx -g 'daemon of…"  2 minutesUp 2 min 0.0.0.0:80->80/tcp compose_load-balancer_1
e9b5b37fe4e5 httpd_1:v1   "/bin/sh -c 'apachec…"  2 minutesUp 2 min 0.0.0.0:81->80/tcp compose_apiweb1_1
28ee22a8eae0 httpd_1:v1   "/bin/sh -c 'apachec…"  2 minutesUp 2 min 0.0.0.0:82->80/tcp compose_apiweb2_1

# Verify
curl http://localhost:81
curl http://localhost:82
curl http://localhost:80 #nginx

# Prep before deploying docker-compose to Swarm. Also images needs to be build before hand.
# Docker stack does not support building images
docker-compose down --volumes #save everything to storage volumes
Stopping compose_load-balancer_1 ... done
Stopping compose_apiweb1_1       ... done
Stopping compose_apiweb2_1       ... done
Removing compose_load-balancer_1 ... done
Removing compose_apiweb1_1       ... done
Removing compose_apiweb2_1       ... done
Removing network compose_default


Deploy compose to Swarm
docker stack deploy --compose-file docker-compose.yml customcompose-stack #customcompose-stack is a prefix for service name
Ignoring unsupported options: build
Creating network customcompose-stack_default
Creating service customcompose-stack_apiweb1
Creating service customcompose-stack_apiweb2
Creating service customcompose-stack_load-balancer

docker stack services customcompose-stack #or
docker service ls
ID           NAME                               MODE       REPLICAS IMAGE        PORTS
k7wwkncov49p customcompose-stack_apiweb1        replicated 0/1      httpd_1:v1   *:81->80/tcp
nl0j5folpmha customcompose-stack_apiweb2        replicated 0/1      httpd_1:v1   *:82->80/tcp
x6p14gmpjyra customcompose-stack_load-balancer  replicated 1/1      nginx:latest *:80->80/tcp

docker stack rm customcompose-stack #remove stack

Selecting a Storage Driver

Go to Docker version matrix to verify what drivers are supported on your platform. Changing storage driver is destructive and you loose all containers volumes. Therefore you need to export/backup then re-import after the storage driver change.

CentOS

Device mapper is officialy supported on CentOS. It can be used on a disc as blockstorage it uses loopback adapter to provide that. Or can be blockstorage devive allowing Docker to mamange it.

docker info --format '{{json .Driver}}'
docker info -f '{{json .}}' | jq .Driver
docker info | grep Storage

sudo touch /etc/docker/daemon.json
sudo vi    /etc/docker/daemon.json #additional options are available
{
  "storage-driver":"devicemapper"
}


Preserving any current images, requires export/backup and re-import after the storage driver change.

docker images
sudo systemctl docker restart
ls -l /var/lib/docker/devicemapper #new location to storing images

Note, in /var/lib/docker new directory devicemapper has been created to store images from now on.

Update 2019 - Docker Engine 18.09.1
WARNING: the devicemapper storage-driver is deprecated, and will be removed in a future release.
WARNING: devicemapper: usage of loopback devices is strongly discouraged for production use.
         Use `--storage-opt dm.thinpooldev` to specify a custom block storage device.

Selecting a logginig driver

Available list of drivers can be seen on Docker documentation page. Most popular are:

  • none - No logs are available for the container and docker logs does not return any output.
  • json-file - (default) the logs are formatted as JSON. The default logging driver for Docker.
  • syslog - Writes logging messages to the syslog facility. The syslog daemon must be running on the host machine.
  • journald - Writes log messages to journald. The journald daemon must be running on the host machine.
  • fluentd - Writes log messages to fluentd (forward input). The fluentd daemon must be running on the host machine.
  • awslogs - Writes log messages to Amazon CloudWatch Logs.
  • splunk - Writes log messages to splunk using the HTTP Event Collector.
  • etwlogs - (Windows) Writes log messages as Event Tracing for Windows (ETW) events


docker info | grep logging
docker container run -d --name <webjson> --logg-driver json-file httpd #per docker container setup
docker logs <testjson>

docker container run -d --name <web> httpd #start new container
docker logs -f _testweb_                   #display standard-out logs
docker service log -f <web> #for swarm all container replicas logs


Enable syslog logginig driver

sudo vi /etc/rsyslog.conf
#uncomment below
$ModLoad imudp
$UDPServerRun 514

sudo systemctl start rsyslog


Change logging driver. Then standard output won't be available after the change.

{
  "log-driver": "syslog",
  "log-opts": {
    "syslog-address": "udp://172.31.10.1"
  }
}

sudo systemctl restart docker
docker info | grep logging
tail -f /var/log/messages #this will show all logging eg. access logs for httpd server

Docker daemon logs

System level logs

# CentOS
/var/messages | grep -i docker

# Ubuntu
sudo journalctl -u docker.service --no-hostname
sudo journalctl -u docker -o json | jq -cMr '.MESSAGE'
sudo journalctl -u docker -o json | jq -cMr 'select(has("CONTAINER_ID") | not) | .MESSAGE'
/var/log/syslog | grep -i docker
Docker container or service logs
docker container logs [OPTIONS] containerID  #single container logs
docker service   logs [OPTIONS] service|task #agregate logs across all cluster deployed container replicas

Container life-cycle policies - eg. autostart

docker container run -d --name web --restart <on-failure|unless-stopped|no|none(default)|always> httpd
# --restart -restart on crash or exit 1 or service or system reboot

Definitions:

  • always - it will restart container always, even if stopped manually, restarting docker-deamon will start container
  • unless-stopped - it will restart container always unless stopped manually by docker container stop
  • on-failure - restart if container exits with non-zero exit code

Universal Control Plance - UCP

It's an application what allow to see all operational details for Swarm cluster when using Docker EE editin. 30 days trial is available.

Communication between Docker Engine, UCP and DTR (Docker Trusted Registry)
  • over TCP/UDP - depends on a port, and whether a response is required, or if a message is a notification
  • IPC - interprocess communication (intra-host), services on the same node
  • API - over TCP, uses API directlyto query or update components in a cluster
References

Install/uninstall UCP image: docker/ucp

OS support:

  • UCP 2.2.11 is supported running on RHEL 7.5 and Ubuntu 18.04

For labs purpose, we can use eg. ucp.example.com the domain example.com is included in UCP and DTR wildcard self-signed certificate.


Install on a manager node

export UCP_USERNAME=ucp-admin
export UCP_PASSWORD=ucp-admin
export UCP_MGR_NODE_IP=172.31.101.248

docker container run --rm -it --name ucp \
  -v /var/run/docker.sock:/var/run/docker.sock docker/ucp:2.2.15 \
  install --host-address=$UCP_MGR_NODE_IP --interactive --debug

# --rm  :- because this container will be only transitinal container
# -it   :- because installation we want interactive
# -v    :- link the container with a file on a host
# --san :- add subject alternative names to certificates (e.g. --san www1.acme.com --san www2.acme.com)
# --host-address    :- IP address or network interface name to advertise to other nodes
# docker/ucp:2.2.11 :- image version
# --dns        :- custom DNS servers for the UCP containers
# --dns-search :- ustom DNS search domains for the UCP containers
# --admin-username "$UCP_USERNAME" --admin-password "$UCP_PASSWORD" #seems these are not supported, although are in a guide


If not provided you will be asked for:

  • Admin password during the process
  • You may enter additional aliases (SANs) now or press enter to proceed with the above list:
    • Additinall aliases: ucp ucp.example.com
DEBU[0062] User entered: ucp ucp.ciscolinux.co.uk
DEBU[0062] Hostnames: [host1c.mylabserver.com 127.0.0.1 172.17.0.1 172.31.101.248 ucp ucp.ciscolinux.co.uk] 


You may want to add DNS entries in /etc/hosts for

  • ucp or ucp.example.com pointing to manager public ip
  • dtr or dtr.example.com pointing a worker node public IPs.


Verify
  • connect to https://ucp.example.com:443.
  • docker ps should see a number of containers running now, they need to see each other therefore we used hosts entries to allow this.
Uninstall
docker container run --rm -it --name ucp \
  -v /var/run/docker.sock:/var/run/docker.sock \
  docker/ucp uninstall-ucp --interactive

INFO[0000] Your engine version 18.09.1, build 4c52b90 (4.15.0-1031-aws) is compatible with UCP 3.1.2 (b822777) 
INFO[0000] We're about to uninstall from this swarm cluster. UCP ID: t0ltwwcw5tdbtjo2fxlzmj8p4 
Do you want to proceed with the uninstall? (y/n): y
INFO[0000] Uninstalling UCP on each node...             
INFO[0031] UCP has been removed from this cluster successfully. 
INFO[0033] Removing UCP Services

Install DTR Docker Trusted Repository image: docker/dtr

It's recommended for single core systems to wait 5 minutes after UCP deployment to relese more cpu cycle. You can see the load may peaking up at 1.0 using w command.

Connect to UCP service https://ucp.example.com, login with creds created. Uload a license.lic file. Go to Admin Settings > Docker Trusted Registry > Pick one of UCP Nodes [worker] You may disable TLS verification on self-signed certificate


Run a given command on a node you want to install DTR. UCP_NODE in lab environment can cause a few issues. For a convinience to avoid avoid port conflict :80,:443 use different node that UCP is instaled. Eg. dns user2c.mylabserver.com or private IP.

export UCP_NODE=wkr-172.31.107.250 #for convinince, to avoid port conflict :80,:443 use worker IP
export UCP_USERNAME=ucp-admin
export UCP_PASSWORD=ucp-admin
export UCP_URL=https://ucp.example.com:443 #avoid using example.com to avoid SSL name validation issues
docker pull docker/dtr

# Optional. Download UCP public certificate
curl -k https://ucp.ciscolinux.co.uk/ca > ucp-ca.pem

docker container run -it --rm docker/dtr install \
  --ucp-node $UCP_NODE --ucp-url $UCP_URL --debug \
  --ucp-username $UCP_USERNAME --ucp-password $UCP_PASSWORD \
  --ucp-insecure-tls  # --ucp-ca "$(cat ucp-ca.pem)"

# --ucp-node :- hostname/IP of the UCP node (any node managed by UCP) to deploy DTR. Random by default
# --ucp-url  :- the UCP URL including domain and port.


It will ask for if not specified:

  • ucp-password: you know it from UCP installation step


Sygnificiant installation logs

..
INFO[0006] Only one available UCP node detected. Picking UCP node 'user2c.labserver.com' 
..
INFO[0006] verifying [80 443] ports on user2c.labserver.com 
..
INFO[0000] Using default overlay subnet: 10.1.0.0/24    
INFO[0000] Creating network: dtr-ol                     
INFO[0000] Connecting to network: dtr-ol                
..
INFO[0008] Generated TLS certificate. dnsNames="[*.com *.*.com example.com *.dtr *.*.dtr]" domains="[*.com *.*.com 172.17.0.1 example.com *.dtr *.*.dtr]" ipAddresses="[172.17.0.1]"
..
INFO[0073] You can use flag '--existing-replica-id 10e168476b49' when joining other replicas to your Docker Trusted Registry Cluster


Verify by logging in to https://dtr.example.com

DTR installation process above has also installed a number of containers on maanger/worker nodes named ucp-agent and number of containers on dedicated DTR node. You can verify DTR by logging to https://dtr.example.com with UCP credentials ucp-admin and the same password if you haven't changed any commands above. Then you should be presented with registry.docker.io like theme. Any images stored there will be trusted from a perspective of our organisation.


Verify by going to UCP https://ucp.example.com, admin settings > Docker Trusted Registry
Ucp-dtr-in-admin

Backup UCP and DTR configuration

This is build into UCP. The process is to start a special container to export UCP configuration to tar file. This can be run as cron job.

docker container run --log-driver non --rm -i --name ucp -v /var/run/docker.sock:/var/run/docker.sock docker/ucp backup > backup.tar
# --rm it's transitional container
# -i run interactivly

# At first run it will error with --id m79xxxxxxxxx, asking to re-run teh command with this id.

# Restore command
docker container run --log-driver non --rm -i --name ucp -v /var/run/docker.sock:/var/run/docker.sock docker/ucp restore --id m79xxx < backup.tar
DTR

Durign a backup DTR will not be available.

docker container run --log-driver non --rm docker/dtr backup  --ucp-insecure-tls --ucp-url <ucp_server_dns:443> --ucp-username admin --ucp-password <password> > dtr-backup.tar

# will you be asked for:
# Choose a replica to back up from: enter

# Restore command
docker container run --log-driver non --rm docker/dtr restore --ucp-insecure-tls --ucp-url <ucp_server_dns:443> --ucp-username admin --ucp-password <password> < dtr-backup.tar

UCP RBAC

The main concept is:

  • administrators can make changes to the UCP swarm/kubernetes, User Management, Orgainisation, Team and Roles
  • users - range of access from Full Control of resources to no access


Ucp-rbac

Note that only Scheduler role allows access to Node to view nodes. Plus schedule workloads of course.

UCP Client bundle

UCP client bundle allows to export a bundle containing a certificate and environment settings that will poind docker-client to UCP in order to use a cluster, create images and services.

Download bundle
  1. Create a user with priviliges that yuo wish docker-client to run as
  2. Download a client budle from User Profile > Client bundle > + New Client Bundle
  3. File ucp-bundle-[username].zip will get downloaded

unzip ucp-bundle-bob.zip 
Archive:  ucp-bundle-bob.zip
 extracting: ca.pem                  
 extracting: cert.pem                
 extracting: key.pem                 
 extracting: cert.pub                
 extracting: env.sh                  
 extracting: env.ps1                 
 extracting: env.cmd     

cat env.sh 
export COMPOSE_TLS_VERSION=TLSv1_2
export DOCKER_TLS_VERIFY=1
export DOCKER_CERT_PATH="$PWD"
export DOCKER_HOST=tcp://3.16.143.49:443
#
# Bundle for user bob
# UCP Instance ID t0ltwwcw5tdbtjo2fxlzmj8p4
#
# This admin cert will also work directly against Swarm and the individual
# engine proxies for troubleshooting.  After sourcing this env file, use
# "docker info" to discover the location of Swarm managers and engines.
# and use the --host option to override $DOCKER_HOST
#
# Run this command from within this directory to configure your shell:
# eval $(<env.sh)

eval $(<env.sh) # apply ucp-bundle

docker images # to list UCP managed images

  1. In my lab I had to update DOCKER_HOST from public IP to private IP

Err: error during connect: Get https://3.16.143.49:443/v1.39/images/json: x509: certificate is valid for 127.0.0.1, 172.31.101.248, 172.17.0.1, not 3.16.143.49

export DOCKER_HOST=tcp://172.31.101.248:443


  1. Verify if you have permissions to create a service
docker service create --name test111 httpd
Error response from daemon: access denied:
no access to Service Create, on collection swarm
  1. Add Grants to the user
    1. Go to User Management > Granst > Create Grant
    2. Base on a Roles, select Full Control
    3. Select Subjects, All Users, select the user
    4. Click Create
  2. Re-run service create command that should succeed now. This service can be managed now also within UCP console.

Docker Secure Registry | image: registry

Docker provides a special docker image that can be used to manage docker imagages both internally or externally thus steps below include securing the access with SSL certificate.


Create certificate

mkdir ~/{auth,certs}
# create self-signed certificate for Docker Repository
mkdir certs; cd _$ #cd to last argument in history
openssl req -newkey rsa:4096 -nodes -sha256 -keyout repo-key.pem -x509 -days 365 -out repo-cer.pem -subj /CN=myrepo.com
# trusted-certs docker client directory, docker client looks for trusted certs when conencting to reomote repo
sudo mkdir -p /etc/docker/certs.d/myrepo.com:5000 #port 5000 is a default port
sudo cp repo-cer.pem /etc/docker/certs.d/myrepo.com:5000/ca.crt

ca.crt is default/required CAroot trustcert file name, that the docker client (docker login API) uses when conencting to remote repository. In our case we trust any cert signed by CA=ca.crt when connecting to myrepo.com:5000 as same certs (selfsigned), got installed in repository:2 container via -v /certs/ option.

Optional for development purposes to add doamin myrepo.com to hostfile binding to local interface ip address.

sudo -i; echo "172.16.10.10 myrepo.com" >> /etc/hosts; exit


Optional add insecure-registry entry

sudo vi /etc/docker/deamon.json
{
  "insecure-registries" : [ "myrepo.com:5000"]
}


Pull special Docker Registry image

mkdir -p ~/auth #authentication directory, used when deploying local repository
docker pull registry:2
docker run --entrypoint htpasswd registry:2 -Bbn reg-admin Passw0rd123 > ~/auth/htpasswd
# -Bbn        -parameters
# reg-admin   -user
# Passw0rd123 -password string for basic htpasswd authentication method, the hashed password will be displayed to STDOUT

$ cat ~/auth/htpasswd
reg-admin:$2y$05$DnTWDHp7uTwaDrw4sXpUbuDDIlLwu3c8MEMsHPjK/AcUMdK/TD6fO


Run Registry container

cd ~
docker run -d -p 5000:5000 --name myrepo \
       -v $(pwd)/certs:/certs \
       -e REGISTRY_HTTP_TLS_CERTIFICATE=/certs/repo-cer.pem \
       -e REGISTRY_HTTP_TLS_KEY=/certs/repo-key.pem \
       -v $(pwd)/auth:/auth \
       -e REGISTRY_AUTH=htpasswd \
       -e REGISTRY_AUTH_HTPASSWD_REALM="Registry Realm" \
       -e REGISTRY_AUTH_HTPASSWD_PATH=/auth/htpasswd \
       registry:2
# -v                               -indicate where our certificates will be mounted within a container
# -e REGISTRY_HTTP_TLS_CERTIFICATE -path to cert inside the container
# -v $(pwd)/auth:/auth             -mounting authentication directory where a file with password is
# -e REGISTRY_AUTH htpasswd        -setting up to use 'htpasswd' authentication method
# registry:2                       -image name, positinal params


Verify

docker pull  alpine
docker tag   alpine     myrepo.com:5000/aa-alpine #create a tagged image (copy) on a local filesystem, 
     # it must be prefixed with the private repo name '/' image name you want to upload as

docker logout  # if logged in to another repository
docker login myrepo.com:5000/aa-alpine #login to a repository that runs as a container, stays login untill logout/reboot
docker login myrepo.com:5000/aa-alpine --username=rep-admin --password Passw0rd123
docker push  myrepo.com:5000/aa-alpine        

docker image rmi alpine myrepo.com:5000/aa-alpine #delete image stored locally
docker pull             myrepo.com:5000/aa-alpine #pull image from a container repository

# List private-repository images
curl --insecure -u "reg-admin:password" https://myrepo.com:5000/v2/_catalog
{"repositories":["aa-alpine"]}

wget --no-check-certificate --http-user=reg-admin --http-password=password https://myrepo.com:5000/v2/_catalog
cat _catalog                                                                                                                                                                       
{"repositories":["my-alpine","myalpine","new-aa-busybox"]}

# List tags
curl --insecure -u "reg-admin:password" https://myrepo.com:5000/v2/aa-alpine/tags/list
{"name":"myalpine","tags":["latest"]}
curl --insecure -u "reg-admin:password" https://myrepo.com:5000/v2/aa-alpine/manifests/latest #entire image metadata


Note. There is no easy way to delete images from repository:2 container.

Docker push

Login to a docker repository
docker info | grep -B1 Registry #check if you are logged in to docker.hub repository
WARNING: No swap limit support
Registry: https://index.docker.io/v1/

docker login

docker info | grep -B1 Registry
Username: pio2pio
Registry: https://index.docker.io/v1/


Tag and push an image
# docker tag local-image:tagname new-repo:tagname  #create a local copy of an image
# docker push new-repo:tagname                     

docker pull busybox
docker --tag busybox:latest pio2pio/testrepo
docker push pio2pio/testrepo
The push refers to repository [docker.io/pio2pio/testrepo]
683f499823be: Mounted from library/busybox 
latest: digest: sha256:bbb143159af9eabdf45511fd5aab4fd2475d4c0e7fd4a5e154b98e838488e510 
size: 527
Docker Content Trust

All images are implicitly trusted by your Docker daemon. Buy can set that ONLY signed images are allowed. You can configure your systems for trusting only image tags that have been signed.

export=DOCKER_CONTENT_TRUST=1 #enable system to sign an image during push process
docker build -t myrepo.com:5000/untrusted.latest
docker push myrepo.com:5000/untrusted.latest
...
No tag specified, skipping trust metadata push
# 2nd attempt, with a tag specified now
docker push myrepo.com:5000/untrusted.latest:latest
Error: error contacting notary server: x509: certificate signed by unknown authority

docker pull myrepo.com:5000/untrusted.latest:latest
Error: error contacting notary server: x509: certificate signed by unknown authority
Errors explained

Err: No tag specified, skipping trust metadata push

  • Explenation: When image gets signed is signed by a tag. Thereofre if you skip a tag it won't get signed and metada get skipped.

Err: error contacting notary server: x509: certificate signed by unknown authority

  • when uploading the image gets uploaded, but it is not trusted becasue signed with self-signed CA
  • when downloading, and DOCKER_CONTENT_TRUST=1 is enabled, the image cannot be downloaded because is untrusted

Theory

What is a docker

Docker is a container runtime platform, where Swarm is a container orchestration platform.

Security

Mutually Authenticated TLS

Docker Swarm is secure by default, it means all communication is encrypted. Mutually Authenticated TLS is the implementation was chosen to secure that communication. Any time a swarm is inicialised, a self-signed CA is generated and issues certificates to every node (mgr or wkr) to facilicate registration (join mgr or wkr) and latter those secure communications. It's transient container brought up to generate CA certs every time a cert is needed. MTLS communication is between Managers and Workers.

Name spaces and Control Groups

Namespaces has been brought to Linux kernel in version 3.8

namespaces provide security and isolation by controlling what a process can see, control groups provide resource management and reporting, by controlling what a process can access


Namespaces provide
isolation so that other pieces of the system remain unaffected by whatever is within the namespace. Docker uses namespaces of various kinds to provide the isolation that containers need in order to remain portable and refrain from affecting the remainder of the host system

Namespace Type (in kernel):

  • User :- (1.12+ experimental) map container users to host users. This can break other isolation items; allows for 32 nested mappings
  • PID :- Process ID - container encapsulate everything into a single process; provides processes with independent set of process IDs (PIDs); allow to avoid PID conflicts
  • Mount - controls volume mounts visible to each container; similar to chroot
  • IPC :- Inter-Process Communication - eg. swarm services allowed to communicate with containers but not outside; isolates system resources from a process, while giving processes crested IPC namespace visibility to each other allowing for interprocess communication
  • Network - allows containers to have its own network stack; eg. ips, routing tables, fw rules, network devices
  • UTS :- Unix Time Sharing namespace, allows a single system to appear to have a different host and domain names to different processes. This namespace determines what hostname and domain name the process running inside that namespace sees.
Control Groups (Cgroups)
provide resource limitation and reporting capability within the container space. They allow for granular control over what host resources are allocated to container/s and when they are allocated. It's Linux kernel feature that limits the resource usage of a process or group of processes.

Common Control Groups

  • CPU
  • Memory
  • Network Bandwidth
  • Disk
  • Priority

Difference between docker attach and docker exec

Attach

The docker attach command allows you to attach to a running container using the containers ID or name, either to view its ongoing output or to control it interactively. You can attach to the same contained process multiple times simultaneously, screen sharing style, or quickly view the progress of your detached process.

The command docker attach is for attaching to the existing process. So when you exit, you exit the existing process.

If we use docker attach, we can use only one instance of shell. So if we want open new terminal with new instance of container's shell, we just need run docker exec

If the docker container was started using /bin/bash command, you can access it using attach, if not then you need to execute the command to create a bash instance inside the container using exec. Attach isn't for running an extra thing in a container, it's for attaching to the running process.

To stop a container, use CTRL-c. This key sequence sends SIGKILL to the container. If --sig-proxy is true (the default),CTRL-c sends a SIGINT to the container. You can detach from a container and leave it running using the CTRL-p CTRL-q key sequence.

exec

"docker exec" is specifically for running new things in a already started container, be it a shell or some other process. The docker exec command runs a new command in a running container.

The command started using docker exec only runs while the container’s primary process (PID 1) is running, and it is not restarted if the container is restarted.

exec command works only on already running container. If the container is currently stopped, you need to first run it. So now you can run any command in running container just knowing its ID (or name):

docker exec <container_id_or_name> echo "Hello from container!"
docker run -it -d shykes/pybuilder /bin/bash

The most important here is the -d option, which stands for detached. It means that the command you initially provided to the container (/bin/bash) will be run in background and the container will not stop immediately.

References