Difference between revisions of "VLANs"
Jump to navigation
Jump to search
| Line 44: | Line 44: | ||
description Trunk Port to Cisco WLC | description Trunk Port to Cisco WLC | ||
switchport trunk encapsulation dot1q | switchport trunk encapsulation dot1q | ||
switchport trunk native vlan 99 | |||
switchport trunk allowed vlan add 10,20,99 | switchport trunk allowed vlan add 10,20,99 | ||
switchport mode trunk | switchport mode trunk | ||
switchport nonegotiate | |||
no shutdown | no shutdown | ||
[[Category:cisco]] | [[Category:cisco]] | ||
Revision as of 09:47, 28 November 2013
Basic VLANs info. Cisco series 1900 routers support up to 16 VLANs.
- Create
#vlan vlan_id
- Deleting a VLAN
#no vlan vlan_id
- Show all VLANs summary and port assignment
r1-basic#sh vlan-switch
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi0/1/0, Gi0/1/1, Gi0/1/2
Gi0/1/3
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 1002 1003
1002 fddi 101002 1500 - - - - - 1 1003
1003 tr 101003 1500 1005 0 - - srb 1 1002
1004 fdnet 101004 1500 - - 1 ibm - 0 0
1005 trnet 101005 1500 - - 1 ibm - 0 0
- Verify trunk interfaces
r1-basic#show interfaces trunk
- Access port configuration
interface GigabitEthernet1/0/2 description Access Port to Cisco Access Point switchport access vlan 10 no ip address end
interface range
interface range gi 0/1/0 - 3
- Trunk port configuration in this example 802.1Q encapsulation is used
interface GigabitEthernet1/0/1 description Trunk Port to Cisco WLC switchport trunk encapsulation dot1q switchport trunk native vlan 99 switchport trunk allowed vlan add 10,20,99 switchport mode trunk switchport nonegotiate no shutdown