- Enable reply to Pings from WAN
Steps
|
Command
|
Purpose
|
Step 1
|
service system list name=PING_RESPONDER expand=enabled
|
Check if "interface group" is associated with WAN (ie enabled)
|
Step 2
|
service system ifadd name=PING_RESPONDER group=wan
|
Add to WAN "interface group" (ie enabled)
|
Step 3
|
saveall
|
Don't forget this to save config!
|
- Undo -- Disable reply to Pings from WAN -- Default mode
Steps
|
Command
|
Purpose
|
Step 1
|
service system ifdelete name=PING_RESPONDER group=wan
|
Remove WAN from "interface group" (ie disabled) -- Default
|
Step 2
|
saveall
|
Don't forget this to save config!
|
Dynamic DNS Service
Here we will use dyn.com service. Free account allows up to 2 IPs to be assigned to dynamic DNS service.
- Navigate to http://192.168.1.254 > Toolbox > Dynamic DNS > Configure
- Preview Dyn.com host configuration
- Once the record is updated successfully you will see on the bottom of the screen
References