Difference between revisions of "Cisco multilayer switch"
Jump to navigation
Jump to search
(Created page with "This is a switch that has router capability of forwarding L3 packets. = Configuration = Basic configuration for L3 packet routing #show sdm prefer !display the curr...") |
|||
Line 10: | Line 10: | ||
S1(config)# do write memory | S1(config)# do write memory | ||
S1(config)# reload !reboot the switch | S1(config)# reload !reboot the switch | ||
once the switch rebooted you can set routing, eg static routes | |||
S1(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.10 |
Latest revision as of 15:59, 12 January 2015
This is a switch that has router capability of forwarding L3 packets.
Configuration
Basic configuration for L3 packet routing
#show sdm prefer !display the current switch template #conf t S1(config)# sdm prefer lanbase-routing !select template, The switch must be reloaded for the new template to take effect. S1(config)# ip routing !enable IPv4 routing, it is enabled by default S1(config)# ipv6 unicast-routing !enable IPv6 routing, disabled by default S1(config)# do write memory S1(config)# reload !reboot the switch
once the switch rebooted you can set routing, eg static routes
S1(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.10