Difference between revisions of "Cisco apply config"
Jump to navigation
Jump to search
(Created page with "= Apply config to AP = Ensure that BVI1 interface has IP address ap1>sh ip int brief Interface IP-Address OK? Method Status Protocol BV...") |
|||
| Line 37: | Line 37: | ||
3851 bytes copied in 0.040 secs (96275 bytes/sec) | 3851 bytes copied in 0.040 secs (96275 bytes/sec) | ||
ap1#reload | ap1#reload | ||
Revision as of 03:07, 23 October 2013
Apply config to AP
Ensure that BVI1 interface has IP address
ap1>sh ip int brief Interface IP-Address OK? Method Status Protocol BVI1 10.0.99.2 YES DHCP up up Dot11Radio0 unassigned YES NVRAM up up Dot11Radio0.10 unassigned YES unset up up Dot11Radio0.20 unassigned YES unset up up Dot11Radio0.99 unassigned YES unset up up Dot11Radio1 unassigned YES NVRAM administratively down down GigabitEthernet0 unassigned YES NVRAM up up GigabitEthernet0.10 unassigned YES unset up up GigabitEthernet0.20 unassigned YES unset up up
List files on the access point flash:
ap1#sh flash:
Directory of flash:/
2 -rwx 3569 Mar 1 1993 03:07:13 +00:00 config.txt
3 -rwx 0 Mar 1 1993 01:53:44 +00:00 air-sap1602e-e-flash.tar
12 drwx 512 Mar 1 1993 01:51:08 +00:00 ap1g2-k9w7-mx.152-2.JB2
4 -rwx 1914 Mar 1 1993 03:07:13 +00:00 private-config
5 -rwx 1048 Mar 1 1993 03:07:13 +00:00 private-multiple-fs
6 -rwx 148 Mar 1 1993 01:24:12 +00:00 env_vars
Delete start up config be deleting file flash:config.txt
ap1#delete flash:config.txt Delete filename [config.txt]? Delete flash:/config.txt? [confirm]
Copy new config from TFTP server to flash:
ap1#copy tftp: flash: Address or name of remote host []? 10.0.99.12 Source filename []? config-ap2-v3.txt Destination filename [config-ap2-v3.txt]? config.txt Accessing tftp://10.0.99.12/config-ap2-v3.txt... Loading config-ap2-v3.txt from 10.0.99.12 (via BVI1): ! [OK - 3851 bytes] 3851 bytes copied in 0.040 secs (96275 bytes/sec) ap1#reload System configuration has been modified. Save? [yes/no]: no Proceed with reload? [confirm] Writing out the event log to flash:/event.log ...
More to come ...
Apply config to a router
WIP.....