Cisco 1941 with EHWIC-VA-DSL-M

From Ever changing code
Revision as of 22:57, 29 September 2013 by Pio2pio (talk | contribs) (→‎References)
Jump to navigation Jump to search

Product codding

Cisco Multimode VDSL2 and ADSL2/2+ High-Speed WAN Interface Card 

Product: EHWIC-VA-DSL-M
Description: 1-port VDSL2/ADSL2+ EHWIC over POTS with Annex M
Minimum IOS: 15.1(3)T

         VDSL2 (very high speed DSL)
        /  Digital Subscriber Line
       /  /
EHWIC-VA-DSL-M
 \      \     \Annex M
  \       ADSL2/A2+ (asymmetric DSL)
   Enhanced High-Speed WAN Interface Card

show inventory
NAME: "CISCO1941/K9", DESCR: "CISCO1941/K9 chassis, Hw Serial#: FCZ1727C5JE, Hw Revision: 1.0"
PID: CISCO1941/K9      , VID: V05 , SN: ***********
NAME: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2 on Slot 0 SubSlot 1", DESCR: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2"
PID: EHWIC-VA-DSL-M    , VID: V01 , SN: ***********

LED explained

LED Color Description
EN Green Operating system is running.
Amber Interface card is resetting.
Blinking System is initializing.
CD LED Green Lit when the unit is connected to the network and operating normally. On ADSL interface cards only, this LED blinks while training with DSLAMs.
LP LED Yellow DSL interface is in loopback mode.
Off Normal operation.

Config prep

! clean start by removing current config
erase startup-config
reload

Current platform info at the boot 

Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
Processor board ID FCZ1727C5JE
1 DSL controller
1 Ethernet interface
2 Gigabit Ethernet interfaces
1 ATM interface
3 terminal lines
2 Cellular interfaces
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)

! initiate xDSL card, it's added automatically 
controller VDSL 0/1/0

References

ISP configs
Other
Retrieved from ‘http://wiki.ciscolinux.co.uk/index.php?title=Cisco_1941_with_EHWIC-VA-DSL-M&oldid=343’