Difference between revisions of "Cisco 1941 with EHWIC-VA-DSL-M"
Jump to navigation
Jump to search
Line 13: | Line 13: | ||
Enhanced High-Speed WAN Interface Card | Enhanced High-Speed WAN Interface Card | ||
;<code>show inventory</code> | |||
NAME: "CISCO1941/K9", DESCR: "CISCO1941/K9 chassis, Hw Serial#: FCZ1727C5JE, Hw Revision: 1.0" | NAME: "CISCO1941/K9", DESCR: "CISCO1941/K9 chassis, Hw Serial#: FCZ1727C5JE, Hw Revision: 1.0" | ||
PID: CISCO1941/K9 , VID: V05 , SN: *********** | PID: CISCO1941/K9 , VID: V05 , SN: *********** | ||
NAME: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2 on Slot 0 SubSlot 1", DESCR: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2" | NAME: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2 on Slot 0 SubSlot 1", DESCR: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2" | ||
PID: EHWIC-VA-DSL-M , VID: V01 , SN: *********** | PID: EHWIC-VA-DSL-M , VID: V01 , SN: *********** | ||
;Current platform info at the boot | |||
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory. | |||
Processor board ID FCZ1727C5JE | |||
1 DSL controller | |||
1 Ethernet interface | |||
2 Gigabit Ethernet interfaces | |||
1 ATM interface | |||
3 terminal lines | |||
2 Cellular interfaces | |||
DRAM configuration is 64 bits wide with parity disabled. | |||
255K bytes of non-volatile configuration memory. | |||
250880K bytes of ATA System CompactFlash 0 (Read/Write) | |||
====LED explained==== | ====LED explained==== |
Revision as of 22:22, 1 October 2013
Product codding
Cisco Multimode VDSL2 and ADSL2/2+ High-Speed WAN Interface Card
Product: EHWIC-VA-DSL-M Description: 1-port VDSL2/ADSL2+ EHWIC over POTS with Annex M Minimum IOS: 15.1(3)T VDSL2 (very high speed DSL) / Digital Subscriber Line / / EHWIC-VA-DSL-M \ \ \Annex M \ ADSL2/A2+ (asymmetric DSL) Enhanced High-Speed WAN Interface Card
show inventory
NAME: "CISCO1941/K9", DESCR: "CISCO1941/K9 chassis, Hw Serial#: FCZ1727C5JE, Hw Revision: 1.0" PID: CISCO1941/K9 , VID: V05 , SN: *********** NAME: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2 on Slot 0 SubSlot 1", DESCR: "ADSL/VDSL over POTS Annex M supporting ADSL1, ADSL2, ADSL2+ and VDSL2" PID: EHWIC-VA-DSL-M , VID: V01 , SN: ***********
- Current platform info at the boot
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory. Processor board ID FCZ1727C5JE 1 DSL controller 1 Ethernet interface 2 Gigabit Ethernet interfaces 1 ATM interface 3 terminal lines 2 Cellular interfaces DRAM configuration is 64 bits wide with parity disabled. 255K bytes of non-volatile configuration memory. 250880K bytes of ATA System CompactFlash 0 (Read/Write)
LED explained
LED | Color | Description |
---|---|---|
EN | Green | Operating system is running. |
Amber | Interface card is resetting. | |
Blinking | System is initializing. | |
CD LED | Green | Lit when the unit is connected to the network and operating normally. On ADSL interface cards only, this LED blinks while training with DSLAMs. |
LP LED | Yellow | DSL interface is in loopback mode. |
Off | Normal operation. |
Config prep
! clean start by removing current config erase startup-config reload
! initiate xDSL card, it's added automatically controller VDSL 0/1/0
Troubleshooting
no debug ppp authentication no debug ppp authorization no debug ppp negotiation no debug ppp subscriber no debug pppoe events no debug pppoe errors no debug ppp error
r1-basic#sh atm pvc interface atM 0/1/0 VCD / Peak Av/Min Burst Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells St 0/1/0 2 0 101 PVC SNAP UBR 1261 UP
References
- Cisco Multimode VDSL2 and ADSL2/2+ High-Speed WAN Interface Card
- Cisco Multimode VDSL2 and ADSL2/2+ EHWIC Q&A
- Connecting DSL WAN Interface Cards
- Overview of Cisco Interface Cards for Cisco Access Routers It explains EHWIC, HWIC, WIC cards differences
- Configuring PPP over ATM with NAT
- Basic Router Configuration See Configuring VDSL Auto Mode & verify
- Cisco 880VA Series ISR G2 Multimode DSL Routers Our module EHWIC-VA-DSL-M card supports the same DSL and ATM features and modem firmware as available for the Cisco 880VA Series.
- DSL Troubleshooting
- Cisco DSL Router Configuration and Troubleshooting Guide - PPPoA Troubleshooting
- Cisco DSL Router Configuration and Troubleshooting Guide - PPPoE: DSL Router as a PPPoE Client Troubleshooting
- Cisco DSL Router Configuration and Troubleshooting Guide - Step-by-Step Configuration of PPPoA with a Static IP Address
- PPP Troubleshooting Flowchart
- Configuring and Troubleshooting PPP Password Authentication Protocol (PAP)
- ISP configs
- O2 broadband updated 2012
- Cisco 867VAE ROuter Configs update 2013, IOS 15
- How to set up O2 Home Broadband on your own router Original O2 source
- Other
- Output Interpreter Requires registration