Difference between revisions of "Cisco 1941 with EHWIC-VA-DSL-M"

From Ever changing code
Jump to navigation Jump to search
Line 46: Line 46:
*[http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/dsl_hwic.html#wp1060302 Connecting DSL WAN Interface Cards]  
*[http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/dsl_hwic.html#wp1060302 Connecting DSL WAN Interface Cards]  
*[http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_ic.html Overview of Cisco Interface Cards for Cisco Access Routers] It explains EHWIC, HWIC, WIC cards differences
*[http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_ic.html Overview of Cisco Interface Cards for Cisco Access Routers] It explains EHWIC, HWIC, WIC cards differences
*[http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/pppoanatfm.html Configuring PPP over ATM with NAT]
*[http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/routconf_ps9572_TSD_Products_Configuration_Guide_Chapter.html#wp1130490 Basic Router Configuration]

Revision as of 19:06, 28 September 2013

Product codding

Cisco Multimode VDSL2 and ADSL2/2+ High-Speed WAN Interface Card

Product: EHWIC-VA-DSL-M
Description: 1-port VDSL2/ADSL2+ EHWIC over POTS with Annex M
Minimum IOS: 15.1(3)T

         VDSL2 (very high speed DSL)
        /  Digital Subscriber Line
       /  /
EHWIC-VA-DSL-M
 \      \     \Annex M
  \       ADSL2/A2+ (asymmetric DSL)
   Enhanced High-Speed WAN Interface Card

LED explained

LED Color Description
EN Green Operating system is running.
Amber Interface card is resetting.
Blinking System is initializing.
CD LED Green Lit when the unit is connected to the network and operating normally. On ADSL interface cards only, this LED blinks while training with DSLAMs.
LP LED Yellow DSL interface is in loopback mode.
Off Normal operation.

References