Cacti graph ADSL
Jump to navigation
Jump to search
WIP
- I need to load MIBs to either Cacti DB or Cisco device - [not necessary, tbc]
- [not working]Loading template from Cisco 877 Cacti Template enabled that graphs are being graph - but the router does not have VDSL card installed so cannot fully test.
- load 4x templates from Cisco ISR ADSL interface graph Cacti forum. OID values are working with snmpwalk. See test below.
Files to import templates:
cacti_data_query_xdsl_line_statistics.xml cacti_data_template_xdsl_interface_statistics.xml cacti_graph_template_xdsl_interface_statistics.xml
File to copy to /usr/share/cacti/resource/snmp_queries/ if you run Ubuntu.
xDSLLineStat.xml
Install ADSLine MIB data query
- Dowload ADSL Line Data script file from Cacti templates website.
- Un-tar, then copy adslLine.xml file to (in Ubuntu) /usr/share/cacti/resource/ directory
- Import XML template following Console > Import templates > Open cacti087d_data_query_adsl_line_mib.xml > press Import
Following errors/missing dependencies found during the import process:
Cacti has imported the following items:
CDEF [success] Make Stack Negative [update] GPRINT Preset [success] Normal [update] Data Input Method [success] Get SNMP Data (Indexed) [update] Data Template [success] ADSL Line - Signal/Noise [new] [success] ADSL Line - Attentuation [new] [success] ADSL Line - Power [new] Graph Template [success] ADSL Line - Noise Margin [new] + Unmet Dependency: (Data Template Item) + Found Dependency: (GPRINT Preset) Normal + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Found Dependency: (CDEF) Make Stack Negative + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) [success] ADSL Line - Attenuation [new] [success] ADSL Line - Output Power [new] + Found Dependency: (Data Template Item) adslAtucCurrOutputP + Found Dependency: (GPRINT Preset) Normal + Unmet Dependency: (Data Template Item) + Found Dependency: (CDEF) Make Stack Negative + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) Data Query [success] ADSL Line MIB [new] + Found Dependency: (Data Input Method) Get SNMP Data (Indexed) + Found Dependency: (Graph Template) ADSL Line - Output Power + Found Dependency: (Data Template) ADSL Line - Power + Unmet Dependency: (Data Template Item) + Found Dependency: (Data Template Item) adslAtucCurrOutputP + Found Dependency: (Graph Template) ADSL Line - Noise Margin + Found Dependency: (Data Template) ADSL Line - Signal/Noise + Unmet Dependency: (Data Template Item) + Unmet Dependency: (Data Template Item) + Found Dependency: (Graph Template) ADSL Line - Attenuation + Found Dependency: (Data Template) ADSL Line - Attentuation + Found Dependency: (Data Template Item) adslAtucCurrAtn + Found Dependency: (Data Template Item) adslAturCurrAtn
Then go to Console > Devices > YourSNMPenabledDevice (Router1941) > scroll at the bottom Associated Data Queries section and select 'ADSL Line MIB' > press ADD > SAVE. Unfortunately the script results with no SNMP data returned when I run 'Verbose Query', here is output:
- There is no ADSL EHWIC card installed at this router output
Data Query Debug Information + Running data query [10]. + Found type = '3' [SNMP Query]. + Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/adslLine.xml' + XML file parsed ok. + <oid_num_indexes> missing in XML file, 'Index Count Changed' emulated by counting oid_index entries + Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.10.94.1.1.3.1.1' Index Count: 0 + No SNMP data returned
SNMP test
Get a device info
snmpstatus -c 'communitystring' -v2c DEV_IP_ADDRESS
List of interfaces
snmpwalk -c 'communitystring' -v2c 10.0.99.100 .1.3.6.1.2.1.2.2.1.2 iso.3.6.1.2.1.2.2.1.2.1 = STRING: "Embedded-Service-Engine0/0" iso.3.6.1.2.1.2.2.1.2.2 = STRING: "GigabitEthernet0/0" iso.3.6.1.2.1.2.2.1.2.3 = STRING: "GigabitEthernet0/1" <-- output ommited --> iso.3.6.1.2.1.2.2.1.2.15 = STRING: "Vlan20" iso.3.6.1.2.1.2.2.1.2.16 = STRING: "Vlan99" iso.3.6.1.2.1.2.2.1.2.17 = STRING: "Dialer1"
Uptime
snmpget -M MIBs -v1 -c hardpassword 10.0.99.100 .1.3.6.1.2.1.1.3.0 iso.3.6.1.2.1.1.3.0 = Timeticks: (591121) 1:38:31.21
Cisco VDSL specific MIBs
These are specific MIB objects that Cacti need to pull run on Linux below:
- SNR value
$ snmpwalk -v2c -c hardpassword 10.0.99.100 .1.3.6.1.2.1.10.94.1.1.3.1.4
iso.3.6.1.2.1.10.94.1.1.3.1.4.17 = Gauge32: 34
- Attenuation value
$ snmpwalk -v2c -c hardpassword 10.0.99.100 .1.3.6.1.2.1.10.94.1.1.3.1.5
iso.3.6.1.2.1.10.94.1.1.3.1.5.17 = Gauge32: 550
- Verified on Cisco 1941 router here
#show controllers vDSL 0/0/0 Controller VDSL 0/0/0 is UP Daemon Status: Up XTU-R (DS) XTU-C (US) Chip Vendor ID: 'BDCM' 'IFTN' Chip Vendor Specific: 0x0000 0x71C8 Chip Vendor Country: 0xB500 0xB500 Modem Vendor ID: 'CSCO' ' ' Modem Vendor Specific: 0x4602 0x0000 Modem Vendor Country: 0xB500 0x0000 Serial Number Near: ********* 1941/K9 15.2(4)M Serial Number Far: Modem Version Near: 15.2(4)M Modem Version Far: 0x71c8 Modem Status: TC Sync (Showtime!) DSL Config Mode: AUTO Trained Mode: G.992.3 (ADSL2) Annex A TC Mode: ATM Selftest Result: 0x00 DELT configuration: disabled DELT state: not running Trellis: ON ON SRA: disabled disabled SRA count: 0 0 Bit swap: enabled enabled Bit swap count: 28726 1047 Line Attenuation: 55.0 dB 29.1 dB Signal Attenuation: 61.3 dB 29.0 dB Noise Margin: 3.4 dB 6.2 dB Attainable Rate: 5308 kbits/s 876 kbits/s Actual Power: 0.0 dBm 12.7 dBm Total FECC: 9404708 20142 Total ES: 3786 884 < -- output obmitted -- >
Reference
- Graphing ADSL stats from a SpeedStream 4200 with collectd
- OID value to graph stats
- Cisco 877 Cacti Template
- Cisco ADSL graph Cacti forum
- Cisco ISR ADSL interface graph Cacti forum
- Cisco ADSL info Cacti forum (see all)
- Cisco SNMP Object navigator
- MIB browser
- SNMP MIB Browser for Linux platforms Qt based, *.deb package provided
- SnmpB SnmpB is an SNMP MIB browser written in QT. It supports SNMPv1, SNMPv2c & SNMPv3. SnmpB can browse/edit/load/add MIB files and can query SNMP agents. It also supports agent discovery, trap events, and graph plotting.