Dotfiles

There is a number of dotfiles in a user home folder that allows customizing working with terminal experience. They are:

~/.profile: executed once when you login
~/.bash_profile: scripts are executed for login shells, if exists Ubuntu won't source .bashrc
~/.bash_logout: na
~/.bash_history: the current session command history
~/.bashrc: scripts are executed for non-login interactive shells
Login shells: are run with the user logged into the system. It's still an interactive session because you input commands and the shell reads them from its standard-input. You use login shells for anything where you need user permissions or where you would like the shell to start up with consistent configuration every time.
Non-login interactive shells: do not have a user attached to its session. These are good for running automated processes that don't depend on being logged in to run.

Generic

.profile

# ~/.profile: executed by the command interpreter for login shells.

# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.  Note, however, that we will have a ~/.bash_profile and it
# will simply source this file as a matter of course.

# See /usr/share/doc/bash/examples/startup-files for examples.
# The files are located in the bash-doc package.

# From here on out, I basically set up my PATH, LD_LIBRARY_PATH, and anything else I'd like
# global to running programs and how those programs find their libraries.  This is shared by
# `cron`, so we really don't want interactive stuff, here.  Also, I setup my environments
# for brew, macports, and fink here, essentially with setting PATH, and invocation of those
# package initialization file as in:

# Brew and locally compiled stuff:
export PATH=/usr/local/bin:$PATH
export PATH=/usr/local/sbin:$PATH

# The following line puts gnu utilities without the prefix "g" in the path
# i.e. tar/gtar:
export PATH=$PATH:/usr/local/Cellar/coreutils/8.21/libexec/gnubin

# MacPorts shoves stuff in /opt, so to get at that stuff...
export PATH=/opt/local/bin:$PATH
export PATH=/opt/local/sbin:$PATH

# Set up for using Fink, which lives in /sw:
[ -e /sw/bin/init.sh ] && . /sw/bin/init.sh

# My stuff:
export PATH=~/perl:$PATH
export PATH=~/bin:$PATH
export PATH=.:$PATH

.bashrc

# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

# If not running interactively, don't do anything
[ -z "$PS1" ] && return

# From here on out, I put in things that are meaningful to interactive shells, like aliases,
# `shopt` invocations, HISTORY control, terminal characteristics, PROMPT, etc.

.bash_profile

# ~/.bash_profile: executed by the command interpreter for login shells.

# Because of this file's existence, neither ~/.bash_login nor ~/.profile
# will be sourced.

# See /usr/share/doc/bash/examples/startup-files for examples.
# The files are located in the bash-doc package.

# Because ~/.profile isn't invoked if this files exists,
# we must source ~/.profile to get its settings:
if [ -r ~/.profile ]; then . ~/.profile; fi

# The following sources ~/.bashrc in the interactive login case,
# because .bashrc isn't sourced for interactive login shells:
case "$-" in *i*) if [ -r ~/.bashrc ]; then . ~/.bashrc; fi;; esac

# I'm still trying to wrap my head about what to put here.  A suggestion
# would be to put all the `bash` prompt coloring sequence functions as
# described on http://brettterpstra.com/2009/11/17/my-new-favorite-bash-prompt/

My Dotfiles

Ubuntu 18.04, 20.04

Note: Note that in below configs .bashrc is sourced before .profile. So, any dependencies for autocompletion for tools that PATH is not set will fail.

`.profile`

# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.

# the default umask is set in /etc/profile; for setting the umask
# for ssh logins, install and configure the libpam-umask package.
#umask 022

# if running bash
if [ -n "$BASH_VERSION" ]; then
    # include .bashrc if it exists
    if [ -f "$HOME/.bashrc" ]; then
       . "$HOME/.bashrc"
    fi
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
    PATH="$HOME/bin:$PATH"
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/.local/bin" ] ; then
    PATH="$HOME/.local/bin:$PATH"
fi

# ------------------------------------------------
# Customized by Piotr
# ------------------------------------------------
eval $(/usr/bin/ssh-agent)

# set GOPATH
if [ -d "$HOME/go" ] ; then
  export GOPATH=$HOME/go        # path where go modules can be found, used by 'go get -u <url>'
  export PATH=$PATH:$GOPATH/bin # path to the additional 'go' binaries
fi

# set Gradle path
export PATH=$PATH:/opt/gradle/gradle/bin
export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64

# Bash-my-AWS and its completions
[ -d "$HOME/.bash-my-aws/bin" ]                 \
  && export PATH="$PATH:$HOME/.bash-my-aws/bin" \
  && source $HOME/.bash-my-aws/aliases          \
  && source $HOME/.bash-my-aws/bash_completion.sh

[ -d "$HOME/.tfenv/bin" ] && export PATH="$PATH:$HOME/.tfenv/bin" # tfenv
[ -d "$HOME/.okta/bin" ]  && export PATH="$PATH:$HOME/.okta/bin"  # okta-aws
[ -d "$HOME/.krew/bin" ]  && export PATH="$PATH:$HOME/.krew/bin"  # krew kubectl plugin manager

# tab completions [moved to .bashrc]
# -----------------------------------------------

`.bashrc`

.bashrc just customization that come at the end of file

# ------------------------------------------------
# Customized by Piotr
# ------------------------------------------------
export PATH="$HOME/.tfenv/bin:$PATH"

alias awsmfa='oathtool --base32 --totp $(cat ~/.aws/aws-mfa)'
alias bat='batcat' # U20.04 apt-get installs bat as batcat as conflicts with 'bacula-console-qt' package
alias vms='cd ~/vms-vagrant/u20cli-1'
alias vpn='   ~/vms-vagrant/u20cli-1/git-host3rd/openvpn3-expect/vpn.tcl'

# Eternal bash history
export HISTFILESIZE=10000
export HISTSIZE=10000
export HISTTIMEFORMAT="[%F %T] "
export HISTFILE=~/.bash_eternal_history
# Force prompt to write history after every command.
# Commented out as is dangerous, as in err you may run 'delete' from another window
# PROMPT_COMMAND="history -a; $PROMPT_COMMAND"

# Default editor
export VISUAL=vim
export EDITOR="$VISUAL"

printf "\n[INFO] processing tab auto-completions scripts\n"
  command -v terraform && complete -C /home/vagrant/.tfenv/versions/$(terraform version | grep -oP 'Terraform v\K[0-9]+\.[0-9]+\.[0-9]+' | cut -d'v' -f2)/terraform terraform
  command -v gcloud    && source /usr/share/google-cloud-sdk/completion.bash.inc # or /usr/lib/google-cloud-sdk/completion.bash.inc
  command -v vault     && complete -C /usr/bin/vault vault
  command -v yq        && source <($_   completion bash)
  command -v argocd    && source <($_   completion bash)
  command -v cmctl     && source <($_   completion bash)
  command -v flux      && source <($_   completion bash)
  command -v helm      && source <($_   completion bash)
  command -v kind      && source <($_   completion bash)
  command -v kubectl   && source <($_   completion bash); alias k=kubectl; complete -F __start_kubectl k
  command -v kustomize && source <($_   completion bash) # complete -C /usr/local/bin/kustomize kustomize
  command -v minikube  && source <($_   completion bash)
  command -v stern     && source <($_ --completion bash)
  command -v vagrant   && { VERSION=$(vagrant version | head -1 | cut -d" " -f3 | tr -d [:space:]); \
                           source /opt/vagrant/embedded/gems/gems/vagrant-$VERSION/contrib/bash/completion.sh; }
# command -v tmux      && source ~/.bash_completion_tmux

  ISTIO_VERSION=1.10.0; ISTIO_INSTALL_DIR=/vagrant/istio-$ISTIO_VERSION
  [ -d "$ISTIO_INSTALL_DIR/bin" ] && PATH="$PATH:$ISTIO_INSTALL_DIR/bin"
  command -v istioctl  && source $ISTIO_INSTALL_DIR/tools/istioctl.bash
  unset ISTIO_VERSION ISTIO_INSTALL_DIR

printf "\n[INFO] Adding function kube-events\n"
kube-events() {
    kubectl get events --all-namespaces --watch \
    -o 'go-template={{.lastTimestamp}} ^ {{.metadata.namespace}} ^ {{.involvedObject.kind}} ^ {{.message}} ^ ({{.involvedObject.name}}){{"\n"}}' \
    | awk -F^ \
    -v   black=$(tput setaf 0) \
    -v     red=$(tput setaf 1) \
    -v   green=$(tput setaf 2) \
    -v  yellow=$(tput setaf 3) \
    -v    blue=$(tput setaf 4) \
    -v magenta=$(tput setaf 5) \
    -v    cyan=$(tput setaf 6) \
    -v   white=$(tput setaf 7) \
    '{ $1=blue $1; $2=yellow $2; $3=green $3; $4=white $4; }  1'
}

source /usr/share/autojump/autojump.sh # Read more at cat /usr/share/doc/autojump/README.Debian

# ------------------------------------------------

prompt (`PS1`)

PS1 variable holds the value of our shell prompt. It's often defined in ~/.bashrc. These steps have been tested with Ubuntu 14.04 LTS, 16.04 LTS, 18.04 LTS, 20.04 LTS:

edit vi ~/.bashrc
Uncomment #force_color_prompt=yes
sed -i -E 's/^#(force_color_prompt=yes)/\1/g' ~/.bashrc
Find if [ "$color_prompt" = yes ]; then statement
Update PS1= to your liking or as per examples below

Note: Because gcloud command it takes around 1-2sec to startup, the function has toggle based on environment variable PS1_GCP. Set the variable to show GCP Project in the prompt.

# Terraform workspace
terraform_workspace() {
    [ -d .terraform ] \
    && printf '%s' " t[$(command terraform workspace show 2>/dev/null)]"
}
# GCP project name
gcp_project_name() {
    local GCP_PROJECT
    [ -n "$PS1_GCP" ] \
    && {
           command -v gcloud &> /dev/null \
           && GCP_PROJECT=$(gcloud config get-value project 2> /dev/null) \
           && [ -n "$GCP_PROJECT" ] && printf '%s' "gcp[${GCP_PROJECT}]";
       }
}
# Kubernetes context
kubernetes_context() {
    local CONTEXT
    command -v kubectl > /dev/null && CONTEXT=$(kubectl config current-context 2> /dev/null) \
    && [ -n "$CONTEXT" ] && printf '%s' "k[${CONTEXT}]"
}
# Git branch
git_branch() {
     [ -d .git ] && printf '%s' "($(git rev-parse --abbrev-ref HEAD 2> /dev/null))"
}

PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\] '
PS1+="\[\e[1;34m\]\$(gcp_project_name   )\[\e[0m\]" # blue
PS1+="\[\e[1;32m\]\$(terraform_workspace)\[\e[0m\]" # green
PS1+="\[\e[1;33m\]\$(kubernetes_context )\[\e[0m\]" # yellow
PS1+="\[\e[1;32m\]\$(git_branch         )\[\e[0m\]" # green
PS1+='\$ '
#PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '

Coloring considerations:

Coloring is best to apply directly to PS1 variable, otherwise window wrapping may cause problems,
check your terminal matrix compatibility
PS1 bashrcgenerator.com
terminal-prompt-not-wrapping-correctly
- important is to enclose non-printable sequences into \[ and \] brackets
- verify shopt checkwinsize is on if not enable by shopt -s checkwinsize
- The reason for the behavior is because bash believes the prompt is longer then it actually is. As a simple example, if one use:
```
PS1="\033[0;34m$"
       1 2345678
```
  the prompt is believed to be 8 characters and not 1. As such if terminal window is 20 columns, after typing 12 characters, it is believed to be 20 and wraps around. This is also evident if one then try to do backspace or Ctrl+u. It stops at column 9. However it also does not start new line unless one are on last column, as a result the first line is overwritten. If one keep typing the line should wrap to next line after 32 characters.

Kubernetes prompt

kube-tmux context and namespace status for tmux
kube-ps1

(<symbol>|<context>:<namespace>) # the default prompt layout
(<symbol>|N/A:N/A)               # context not set

Reload shell without logging out

. ~/.bashrc
source ~/.bashrc
exec bash
exec "$BASH"

Differences

source ~/.bashrc will preserve your current shell. Except for the modifications that reloading ~/.bashrc into the current shell (sourcing) makes, the current shell and its state are preserved, which includes environment variables, shell variables, shell options, shell functions, and command history.
exec bash, or, more robustly, exec "$BASH"[1], will replace your current shell with a new instance, and therefore only preserve your current shell's environment variables (including ones you've defined ad-hoc). In other words: Any ad-hoc changes to the current shell in terms of shell variables, shell functions, shell options, command history are lost.

[1] exec bash could in theory execute a different bash executable than the one that started the current shell, if it happens to exist in a directory listed earlier in the $PATH. Since special variable $BASH always contains the full path of the executable that started the current shell, exec "$BASH" is guaranteed to use the same executable.

Bash auto completion | autocompletion

Debian based

sudo apt-get install bash-completion

RPM based distros

Amazon Linux AMI. Version 2 has epel repo (Extra Packages for Enterprise Linux) enabled

# CentOS or RHEL 6.x
sudo yum-config-manager --enable epel

# CentOS or RHEL 7.x
sudo yum install -y epel-release

sudo yum repolist # verify epel
sudo yum install bash-completion bash-completion-extras

# RHEL8
sudo yum install -y bash-completion

Bash coloured autocomplete of symlinks

Use bash --version | grep release to find out what version of Bash you are using.

To configure it add lines below to your ~/.inputrc or system-wide /etc/inputrc

Bash 4.3 readline adds a variable that enables color for tab completion to show different colors for executable files, directories, etc., during tab completion. Readline in the upcoming Bash 4.4 adds a variable which enables colour to indicate the matching portion of the string during tab completion.

set colored-stats on             #bash 4.3
set colored-completion-prefix on #bash >=4.4

You can see the values of these variables using

bind -v | grep color

Bash autocomplete and common string with ellipses

Add to your ~/.inputrc or system-wide /etc/inputrc file

set completion-prefix-display-length 2

When you TAB to autocomplete the common string if it's longer than 2 characters will be replaced with (...) ellipses

Bash-autocomplete-common-string-into-ellipses

Bash key binding, cli shortcuts

CTL + a - move to BOL
CTL + e - move to EOL
ALT + f - move one word to right (forward)
ALT + b - move one word to left (backward)
CTL + u - erase line to the left/BOL
CTL + k - erase line to the right/EOL
CTL + w - erase one word to the right (forward)
ALT + d - erase one word to the left (backward)
CTL + t - switch characters places, with a character behind
CTL + r - reverse search of history
CTL + s - forward search within history
CTL + p/n - scroll through history up/down
ALT-Shift-.: Jump to the end of the history (most recent)
ALT-Shift-,: Jump to the beginning of the history (most distant)
CTL + l - clears screen

Escape sequences

ESC + . or !$ or !_ - is last argument of the last command

Replace last command strings

echo "first command" && echo "second command!"
!!:gs/command/echo   #call last command and substitute word "command" with "echo"
first echo
second echo!

Readline This is what allows for all bash key bindings, colouring etc..

Bash history

History-Interaction Bash GNU manual

Key bindings in bash shell

CTL + r - reverse search of history
CTL + s - forward search within history
CTL + p/n - scroll through history up/down
ALT + Shift + .: Jump to the end of the history (most recent)
ALT + Shift + , Jump to the beginning of the history (most distant)
ALT + . or ESC + . -recall the last argument of any of the previous commands

Event Designators and Word designators

Event Designators: is a reference to a command line entry in the history list. Unless the reference is absolute, events are relative to the current position in the history list.
Word designators: are used to select desired words from the event. A : separates the event specification from the word designator. It may be omitted if the word designator begins with a ^, $, *, -, or %’. Words are numbered from the beginning of the line, with the first word being denoted by 0 (zero). Words are inserted into the current line separated by single spaces.

!* all previous arguments, eg. ls /tmp; cd !*
!! recall previous command (often pronounced "bang bang")
!n command number n from history, eg. !-2
!pattern recall recent command matching pattern, eg. !vi
!!:s/find/replace recall last command, substitute find with replace, also !!:s^find^replace works
$_ last argument from previous command
$_ last command's all arguments, allows call new command with previous command arguments
!^ and !$ ^first and last$ argument (after the program /or built-in /or script) from previous command
!!:0 - recall the previous command itself (just a command)
!!:0- hf - reproduces the previous command substituting "hf" for the last argument
!!:1, !!:2 recall previous command with n-number argument; examples

recall previous command with n-number argument

command with n-number argument

n-command with n-argument

re-call all args new command

$ touch {a,b,c}.sh
$ ls a.sh b.sh c.sh
$ ls !:2
ls a.sh
a.sh

$ ls !:2-3
ls a.sh b.sh
a.sh  b.sh

.2075  ls a.sh b.sh c.sh    #-3
 2076  cd a.sh b.sh c.sh    #-2
 2077  history              #-1
#take the first arg from the 3rd last command history
$ ls !-3:1 
ls a.sh
a.sh

 2076  cd a.sh b.sh c.sh
 2077  history 
#take 2nd arg from 2076th command history
$ ls !2076:2 
ls b.sh
b.sh

ls /tmp
cd !*
#you are now in /tmp

Delete last 10 commands from history

You can edit vi $HISTFILE file or use snippet below. It also delete the snippet execution entry.

pos=$HISTCMD; start=$(( $pos-11 )); end=$(( $pos-1 )); for i in $(eval echo "{${start}..${end}}"); do history -d $start; done

It uses $HISTCMD environment var to get the history index and uses that to delete last 10 entries in history.

Delete history range

If you delete line N from the history, then line N+1 moves in position N etc. Therefore for loop has reverse sequence from latest history to older, eg. range from, 6263 to 5845 history lines.

for i in {6263..5845}; do history -d $i; done

Persistent history

To persist your history and write every command to the file add below do the end of your .bashrc

If you are Ubuntu user comment out these 2

# HISTSIZE=1000
# HISTFILESIZE=2000

Add at the end of your .bashrc

# Eternal bash history.
# ---------------------
export HISTFILESIZE=10000
export HISTSIZE=10000
export HISTTIMEFORMAT="[%F %T] "
export HISTFILE=~/.bash_eternal_history
# Force prompt to write history after every command.
PROMPT_COMMAND="history -a; $PROMPT_COMMAND"

Copy current history to new history file

$ cat ~/.bash_history >>~/.bash_eternal_history

Resources

CustomizingBashPrompt Ubuntu wiki
Git Bash Prompt repo project Great informative Git prompt
History-Interaction Bash GNU manual

Linux shell/Bash prompt PS1, settings and history

Contents

Dotfiles

Generic

My Dotfiles

`.profile`

`.bashrc`

prompt (`PS1`)

Kubernetes prompt

Reload shell without logging out

Bash auto completion | autocompletion

Debian based

RPM based distros

Bash coloured autocomplete of symlinks

Bash autocomplete and common string with ellipses

Bash key binding, cli shortcuts

Bash history

Key bindings in bash shell

Event Designators and Word designators

Delete last 10 commands from history

Delete history range

Persistent history

Resources

Navigation menu

Linux shell/Bash prompt PS1, settings and history

Dotfiles

Generic

My Dotfiles

.profile

.bashrc

prompt (PS1)

Kubernetes prompt

Reload shell without logging out

Bash auto completion | autocompletion

Debian based

RPM based distros

Bash coloured autocomplete of symlinks

Bash autocomplete and common string with ellipses

Bash key binding, cli shortcuts

Bash history

Key bindings in bash shell

Event Designators and Word designators

Delete last 10 commands from history

Delete history range

Persistent history

Resources

Navigation menu

Search

`.profile`

`.bashrc`

prompt (`PS1`)