Difference between revisions of "Cisco console port"
| Line 76: | Line 76: | ||
You can disable the beep sound for the BEL character by editing the Beep line in the [Tera Term] section of the setup file like the following: | You can disable the beep sound for the BEL character by editing the Beep line in the [Tera Term] section of the setup file like the following: | ||
Beep=off | Beep=off | ||
Also, the terminal screen will flush instead of | Also, the terminal screen will flush instead of making the beep in the following configuration. | ||
Beep=visual | Beep=visual | ||
Default: | Default: | ||
Revision as of 14:17, 5 January 2014
Linux console port serial connection
Install minicon
apt-get install minicom
Discover your serial com port, here it will be ttyS0
logger@syslog0050:~$ dmesg | grep tty [ 0.000000] console [tty0] enabled [ 1.030584] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
setup minicon with -s switch
# minicom -s
+-----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup |
| Modem and dialing |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
| Exit from Minicom |
+--------------------------+
Choose Serial port setup and specify Cisco Defaults for Serial Connection like below:
+-----------------------------------------------------------------------+ | A - Serial Device : /dev/ttyS0 | | B - Lockfile Location : /var/lock | | C - Callin Program : | | D - Callout Program : | | E - Bps/Par/Bits : 9600 8N1 | | F - Hardware Flow Control : Yes | | G - Software Flow Control : No | | | | Change which setting? | +-----------------------------------------------------------------------+
come out of Serial port setup by pressing Esc then save configuration file:
+-----[configuration]------+
| Filen+-----------------------------------------+
| File |Give name to save this configuration? |
| Seria|> cisco |
| Modem+-----------------------------------------+
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
| Exit from Minicom |
+--------------------------+
Once saved, it will store the configuration in /etc/minicom/. To connect to your device, run minicom with config file name:
#minicom cisco Welcome to minicom 2.4 OPTIONS: I18n Compiled on Sep 5 2010, 08:31:32. Port /dev/ttyUSB2 Press CTRL-A Z for help on special keys R1> R1>en R1#
To Exit from minicom, Click Ctrl, A, Z then X.
Tetra Term VT
The motion receiving BEL character
Tera Term will sound the beep when the BEL character(ASCII $07) receives.
You can disable the beep sound for the BEL character by editing the Beep line in the [Tera Term] section of the setup file like the following:
Beep=off
Also, the terminal screen will flush instead of making the beep in the following configuration.
Beep=visual
Default:
Beep=on
Windows path: C:\Program Files (x86)\teraterm\TERATERM.INI