Linux NFS

Ubuntu NFS version 4

Single server scenario

In this example we will install server NFS running on Ubuntu 14.04 LTS and mount its exported file system to another Ubuntu host. This is the most common scenario where you will deploy a single server that allows one or more individual clients or networks to have access to one or more folders that can be mounted locally.

NFS server

One of requirments is that NFS server MUST have at least one static IP address that we can bind NFS service to. Next, be sure that the hostname (short and fully qualified) exist as an entry in your local hosts file.

vi /etc/hosts    # add a line below, so the static ip has short and FQDN names
10.0.0.100 nfs-server nfs-server.example.com
hostname -f   #verify FQDN

Install packages

• nfs-common - common NFS client library
• nfs-kernel-server - NFS server demon/service
• rpcbind - tells other networked machines at what location to find a service

sudo apt-get install nfs-common nfs-kernel-server rpcbind

Create default RPCBIND config file, to explicitly call out that we are not passing any options to the daemon

vi /etc/default/rpcbind    #crate a file with only line below
OPTIONS=""

Allow other hosts on the network contact our server. Here all hosts on 10.0.0.0/24 network cat use portmap service and in turn NFS shares.

vi /etc/hosts.allow
portmap: 10.0.0.

Enable idmapd, this is required for NFSv4

vi /etc/default/nfs-common  #add a line below
NEED_IDMAPD=YES

Configure idmapd, the file contains user mapping, you can leave it as it is

vi /etc/default/nfs-common

NFS Server - Export Configuration

Create NFS root directory

mkdir /srv/exports

Make the directory available

vi /etv/exports  #add a line below
10.0.0.0/255.255.255.0(rw,no_root_squash,no_subtree_check,crossmnt,fsid=0)

This simple file does a number of things. It defines the base directory of our share (in our case the previously created directory we called “/exports”), it provides read and write access to anyone on our allowed client network, it gives remote root/admin users full control over local root owned files (no_root_squash), don’t worry about the exported directory being an entire file system (no_subtree_check), allow subdirectories of the exported folder to be seen as subfolders (crossmnt) and finally assume that the volume share exported is a regular file system and not another share or special device (fsid=0).

Start NFS deamon and verify rpcbind status

sudo service nfs-kernel-server start
sudo service rpcbind status

Configure Client

Install packages

sudo apt-get install nfs-common rpcbind

Mount NFS remote export

sudo mkdir /mnt/share
sudo mount.nfs4 10.0.0.100:/ /mnt/share

Verify mount

mount | grep nfs
10.0.0.100:/ on /mnt/share type nfs4 (rw,addr=10.0.0.100,clientaddr=10.0.0.11)

Make the export permanent in fstab

vi /etc/fstab #add below
10.0.0.100:/    /mnt/share  nfs4    rw 0 0