Difference between revisions of "Cisco processes and load"

From Ever changing code
Jump to navigation Jump to search
 
(8 intermediate revisions by the same user not shown)
Line 38: Line 38:
   31          0          3          0  0.00%  0.00%  0.00%  0 Transport Port A
   31          0          3          0  0.00%  0.00%  0.00%  0 Transport Port A


<tt>17.43%  0 TTY Background</tt> showing high cpu utilization due to <tt>ssh debugging on/tt> and <tt>terminal monitor</tt> enabled on ssh console.
A line with '''PID 28''' shows high cpu utilization <tt>17.43%  0 TTY Background</tt> due to <tt>ssh debugging on</tt> and <tt>terminal monitor</tt> enabled on ssh console.


= CPU history graph =
= CPU history graph =
Line 103: Line 103:
                     CPU% per hour (last 72 hours)
                     CPU% per hour (last 72 hours)
                   * = maximum CPU%  # = average CPU%
                   * = maximum CPU%  # = average CPU%
; Enable %CPU utilization history table
Sets the process entry limit and the size of the history table for CPU utilization statistics.
•In this example, to generate an entry in the history table, a process must exceed 10 percent CPU utilization.
•In this example, the duration of time for which the most recent history is saved in the history table is 300 seconds.
r1(config)#process cpu statistics limit entry-percentage 10 size 300
r1#sh proc cpu history table
CPU utilization for five seconds: 11%/5% at 25w3d
CPU utilization for five seconds: 12%/5% at 25w3d
CPU utilization for five seconds: 8%/1% at 25w3d


= Network connections =
= Network connections =
Line 144: Line 155:
  tcp 81.133.111.222:61214 10.0.10.46:61214 178.33.44.55:443  178.33.44.55:443
  tcp 81.133.111.222:61214 10.0.10.46:61214 178.33.44.55:443  178.33.44.55:443
  tcp 81.133.111.222:49163 10.0.10.47:49163 64.4.18.55:80      64.4.18.55:80
  tcp 81.133.111.222:49163 10.0.10.47:49163 64.4.18.55:80      64.4.18.55:80
== Other show commands ==
<code>show ip port-map</code> is showing the current port mapping on your Cisco device
#show ip port-map
Default mapping:  snmp                udp port 161                        system defined
Default mapping:  echo                tcp port 7                          system defined
Default mapping:  echo                udp port 7                          system defined
Default mapping:  telnet              tcp port 23                        system defined
Default mapping:  wins                tcp port 1512                      system defined
show ip cache flow
show ip traffic
= DNS translations =
To display the default domain name, the style of name lookup service, a list of name server hosts, and the cached list of hostnames and addresses specific to a particular Domain Name System (DNS) view or for all configured DNS views. The <code>show hosts</code> command lists the name servers and their corresponding IP addresses. It also lists the hostnames, their corresponding IP addresses, and their corresponding aliases (if applicable) in a host table summary.
r1#'''show hosts'''
Default domain is home.geteway
Name/address lookup uses domain service
Name servers are 62.6.11.111, 194.72.22.222
Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate
        temp - temporary, perm - permanent
        NA - Not Applicable None - Not defined
Host                      Port  Flags      Age Type  Address(es)
bbc.co.uk                None  (temp, OK)  0  IP    212.58.253.67
                                                      212.58.251.195
host81-133-111-222.in-add None  (temp, OK)  0  IP    81.133.111.222
l.doubleclick.net        NA    (temp, EX) 12  SOA      ns1.google.com dns-admin.google.com
                                                    1537818 21600 3600 1209600 300
Host                      Port  Flags      Age Type  Address(es)
nsatc.net                NA    (temp, EX) 24  SOA      admin.nsatc.net dl-cdn_infrastructure.level3.com
                                                    1363134183 10800 2700 3600000 900
= Access point =
This section is based on Cisco AIR-SAP1602E-E however the troubleshooting commands used should work on any other platform with minimum IOS version 15.
ap1#'''show dot11 ?'''
  aaa                Authentication, Authorization, and Accounting
  activity-timeout  Default/Maximum activity timeout values
  adjacent-ap        Display Fast Secure Roaming adjacent AP list
  antenna-alignment  Display recent antenna alignment results
  arp-cache          Arp Cache
  associations      association information
  band-select        Display band select output
  bssid              show SSID to BSSID mapping
  cac                Admission Control Statistics
  carrier            Display recent carrier test results
  directed-roam      Directed Roaming Clients/APs
  ids                Intrusion Detection System
  lbs                Display LBS configuration and status
  linktest          Display recent linktest results
  mac-authen        MAC authentication details
  neighbor-ap        Display neighbor ap
  network-map        Network Map
  offchannel        Dot11 RM Offchannel
  statistics        statistics information
  traffic-streams    Admitted WMM Traffic-Streams
  vlan-name          Display VLAN name to ID map(s)
;Show connected clients
'''show dot11 associations'''
802.11 Client Stations on Dot11Radio0:
SSID [WL-Wireless] :
MAC Address    IP address      Device        Name            Parent        State
6817.1122.aa5d 10.0.10.100    ccx-client    ap1            self          Assoc
6c88.2233.bb30 10.0.10.119    ccx-client    ap1            self          Assoc
6c88.3344.cc28 10.0.10.131    ccx-client    ap1            self          Assoc
6c88.5566.ddf8 10.0.10.118    ccx-client    ap1            self          Assoc
;Show SSID to MAC address (BSSID) mapping
'''show dot11 bssid'''
Interface      BSSID        Guest  SSID
Dot11Radio0  e8ed.f3dd.aa30  No  WL-MGM
Dot11Radio0  e8ed.f3dd.aa31  Yes  WL-WIRELESS
[[Category:cisco]]

Latest revision as of 14:56, 26 August 2014

This page provides how to get general info about your Cisco device.

Processes

ap3#show processes cpu
CPU utilization for five seconds: 0%/0%; one minute: 1%; five minutes: 18%
 PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
 PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
   1          76        1464         51  0.00%  0.00%  0.00%   0 Chunk Manager
   2           8       68954          0  0.00%  0.00%  0.00%   0 Load Meter
   3         196         266        736  0.15%  0.17%  0.05%   1 SSH Process
   4           0           1          0  0.00%  0.00%  0.00%   0 RO Notify Timers
   5      841172       81225      10356  0.00%  0.16%  0.21%   0 Check heaps
   6           0          38          0  0.00%  0.00%  0.00%   0 Pool Manager
   7           0           1          0  0.00%  0.00%  0.00%   0 DiscardQ Backgro
   8           0           2          0  0.00%  0.00%  0.00%   0 Timers
   9           0          62          0  0.00%  0.00%  0.00%   0 WATCH_AFS
  10           0           1          0  0.00%  0.00%  0.00%   0 AAA_SERVER_DEADT
  11           0           1          0  0.00%  0.00%  0.00%   0 Policy Manager
 PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
  12           0           1          0  0.00%  0.00%  0.00%   0 Crash writer
  13           0           1          0  0.00%  0.00%  0.00%   0 Exception contro
  14           4       10759          0  0.00%  0.00%  0.00%   0 SNTP
  15           0           1          0  0.00%  0.00%  0.00%   0 RMI RM Notify Wa
  17           0           1          0  0.00%  0.00%  0.00%   0 Net Input
  18           4          53         75  0.00%  0.00%  0.00%   0 ARP Input
  19           0      359613          0  0.00%  0.00%  0.00%   0 ARP Background
  20           0           2          0  0.00%  0.00%  0.00%   0 Entity MIB API
  21           0           1          0  0.00%  0.00%  0.00%   0 CEF MIB API
  22           0           3          0  0.00%  0.00%  0.00%   0 PrstVbl
  23           0      344764          0  0.00%  0.00%  0.00%   0 GraphIt
 PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process
  24           0           1          0  0.00%  0.00%  0.00%   0 Critical Bkgnd
  25           4      103457          0  0.00%  0.00%  0.00%   0 Net Background
  26           0        8626          0  0.00%  0.00%  0.00%   0 IDB Work
  27        2664       28191         94  0.00%  0.00%  0.17%   0 Logger
  28      202052    18128190         11  0.00%  1.34% 17.43%   0 TTY Background
  29           0           4          0  0.00%  0.00%  0.00%   0 IF-MGR control p
  30           0          12          0  0.00%  0.00%  0.00%   0 IF-MGR event pro
  31           0           3          0  0.00%  0.00%  0.00%   0 Transport Port A

A line with PID 28 shows high cpu utilization 17.43% 0 TTY Background due to ssh debugging on and terminal monitor enabled on ssh console.

CPU history graph

ap3#show processes cpu history

ap3   09:58:02 AM Sunday Nov 10 2013 UTC





                                               22222
  100
   90
   80
   70
   60
   50
   40
   30
   20
   10
     0....5....1....1....2....2....3....3....4....4....5....5....6
               0    5    0    5    0    5    0    5    0    5    0
               CPU% per second (last 60 seconds)




           668777
      22223015665 322222222222212222 22212222212222222222222222 22
  100
   90        *
   80        ****
   70        **#*
   60      *####*
   50      *#####
   40      *#####
   30      *#####
   20      ######
   10      ######
     0....5....1....1....2....2....3....3....4....4....5....5....6
               0    5    0    5    0    5    0    5    0    5    0
               CPU% per minute (last 60 minutes)
              * = maximum CPU%   # = average CPU%





      222322222733222444789887553233323232745886776555553724322377235645644447
  100
   90
   80
   70
   60
   50
   40
   30
   20
   10          *        ********          * ************ *      **  ** **    *
     0....5....1....1....2....2....3....3....4....4....5....5....6....6....7..
               0    5    0    5    0    5    0    5    0    5    0    5    0
                   CPU% per hour (last 72 hours)
                  * = maximum CPU%   # = average CPU%
Enable %CPU utilization history table

Sets the process entry limit and the size of the history table for CPU utilization statistics. •In this example, to generate an entry in the history table, a process must exceed 10 percent CPU utilization. •In this example, the duration of time for which the most recent history is saved in the history table is 300 seconds. 

r1(config)#process cpu statistics limit entry-percentage 10 size 300

r1#sh proc cpu history table
CPU utilization for five seconds: 11%/5% at 25w3d
CPU utilization for five seconds: 12%/5% at 25w3d
CPU utilization for five seconds: 8%/1% at 25w3d

Network connections

Open tcp/udp ports

r1#show control-plane host open-ports
Active internet connections (servers and established)
Prot               Local Address             Foreign Address                  Service    State
 tcp                        *:22                         *:0               SSH-Server   LISTEN
 tcp                        *:22         93.96.111.222:59875               SSH-Server ESTABLIS
 tcp                        *:23                         *:0                   Telnet   LISTEN
 tcp                        *:53                         *:0               DNS Server   LISTEN
 udp                     *:58093                         *:0                  IP SNMP   LISTEN
 udp                        *:53                         *:0               DNS Server   LISTEN
 udp                        *:67                         *:0            DHCPD Receive   LISTEN
 udp                       *:161                         *:0                  IP SNMP   LISTEN
 udp                       *:162                         *:0                  IP SNMP   LISTEN

TCP established connections

r1#show tcp brief
TCB       Local Address               Foreign Address             (state)
2AABFEA4  host81-133-111.222.in-addr.93-96-111.222.zone4.bethere ESTAB
          btopenworld.com.22          .co.uk.59875

UDP all connections

r1#show udp
Proto        Remote      Port      Local       Port  In Out  Stat TTY OutputIF
 17     10.0.10.89      18980 81.133.111.222     53   0   0 1000211   0
 17     10.0.10.53         68 10.0.99.100        67   0   0 1002211   0
 17       --listen--          81.133.111.222    161   0   0 1001001   0
 17       --listen--          81.133.111.222    162   0   0 1001011   0
 17       --listen--          81.133.111.222  58093   0   0 1001011   0
 17(v6)   --listen--          --any--           161   0   0 1020001   0
 17(v6)   --listen--          --any--           162   0   0 1020011   0
 17(v6)   --listen--          --any--         59325   0   0 1020011   0

NAT translations

r1#show ip nat nvi translations
Pro Source global      Source local       Destin  local      Destin  global
tcp 81.133.111.222:64625 10.0.10.33:64625 178.33.44.55:443  178.33.44.55:443
tcp 81.133.111.222:49220 10.0.10.38:49220 178.33.44.55:443  178.33.44.55:443
tcp 81.133.111.222:54938 10.0.10.44:54938 178.33.44.55:443  178.33.44.55:443
tcp 81.133.111.222:61214 10.0.10.46:61214 178.33.44.55:443  178.33.44.55:443
tcp 81.133.111.222:49163 10.0.10.47:49163 64.4.18.55:80      64.4.18.55:80

Other show commands

show ip port-map is showing the current port mapping on your Cisco device 

#show ip port-map
Default mapping:  snmp                 udp port 161                        system defined
Default mapping:  echo                 tcp port 7                          system defined
Default mapping:  echo                 udp port 7                          system defined
Default mapping:  telnet               tcp port 23                         system defined
Default mapping:  wins                 tcp port 1512                       system defined

show ip cache flow
show ip traffic

DNS translations

To display the default domain name, the style of name lookup service, a list of name server hosts, and the cached list of hostnames and addresses specific to a particular Domain Name System (DNS) view or for all configured DNS views. The show hosts command lists the name servers and their corresponding IP addresses. It also lists the hostnames, their corresponding IP addresses, and their corresponding aliases (if applicable) in a host table summary. 

r1#show hosts
Default domain is home.geteway
Name/address lookup uses domain service
Name servers are 62.6.11.111, 194.72.22.222

Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate
       temp - temporary, perm - permanent
       NA - Not Applicable None - Not defined

Host                      Port  Flags      Age Type   Address(es)
bbc.co.uk                 None  (temp, OK)  0   IP    212.58.253.67
                                                      212.58.251.195
host81-133-111-222.in-add None  (temp, OK)  0   IP    81.133.111.222
l.doubleclick.net         NA    (temp, EX) 12  SOA      ns1.google.com dns-admin.google.com
                                                   1537818 21600 3600 1209600 300
Host                      Port  Flags      Age Type   Address(es)
nsatc.net                 NA    (temp, EX) 24  SOA      admin.nsatc.net dl-cdn_infrastructure.level3.com
                                                   1363134183 10800 2700 3600000 900

Access point

This section is based on Cisco AIR-SAP1602E-E however the troubleshooting commands used should work on any other platform with minimum IOS version 15. 

ap1#show dot11 ?
  aaa                Authentication, Authorization, and Accounting
  activity-timeout   Default/Maximum activity timeout values
  adjacent-ap        Display Fast Secure Roaming adjacent AP list
  antenna-alignment  Display recent antenna alignment results
  arp-cache          Arp Cache
  associations       association information
  band-select        Display band select output
  bssid              show SSID to BSSID mapping
  cac                Admission Control Statistics
  carrier            Display recent carrier test results
  directed-roam      Directed Roaming Clients/APs
  ids                Intrusion Detection System
  lbs                Display LBS configuration and status
  linktest           Display recent linktest results
  mac-authen         MAC authentication details
  neighbor-ap        Display neighbor ap
  network-map        Network Map
  offchannel         Dot11 RM Offchannel
  statistics         statistics information
  traffic-streams    Admitted WMM Traffic-Streams
  vlan-name          Display VLAN name to ID map(s)
Show connected clients
show dot11 associations

802.11 Client Stations on Dot11Radio0:

SSID [WL-Wireless] :

MAC Address    IP address      Device        Name            Parent         State
6817.1122.aa5d 10.0.10.100     ccx-client    ap1             self           Assoc
6c88.2233.bb30 10.0.10.119     ccx-client    ap1             self           Assoc
6c88.3344.cc28 10.0.10.131     ccx-client    ap1             self           Assoc
6c88.5566.ddf8 10.0.10.118     ccx-client    ap1             self           Assoc
Show SSID to MAC address (BSSID) mapping
show dot11 bssid
Interface      BSSID         Guest  SSID
Dot11Radio0   e8ed.f3dd.aa30  No   WL-MGM
Dot11Radio0   e8ed.f3dd.aa31  Yes  WL-WIRELESS
Retrieved from ‘http://wiki.ciscolinux.co.uk/index.php?title=Cisco_processes_and_load&oldid=1325’