Windows ipconfig and route command

From Ever changing code
Jump to navigation Jump to search

Hi. It's pretty funny talking about Windows and routing :0, however I need to document how to change a route metric when my Internet is from WLAN but LAN interface has just been configured by DHCP.

Modify static route

BEFORE
C:\>route print
===========================================================================
Interface List
 17...7c e9 d3 e3 8d 84 ......Bluetooth Device (Personal Area Network)
 15...60 67 20 02 a2 d1 ......Microsoft Virtual WiFi Miniport Adapter
 14...60 67 20 02 a2 d0 ......Intel(R) Centrino(R) Advanced-N 6205
 13...00 21 cc ca c3 9f ......Intel(R) 82579LM Gigabit Network Connection
  1...........................Software Loopback Interface 1
 22...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
 23...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0    192.168.1.254     192.168.1.85     25
          0.0.0.0          0.0.0.0       10.10.10.1       10.10.10.2     10
       10.10.10.0  255.255.255.248         On-link        10.10.10.2    266
       10.10.10.2  255.255.255.255         On-link        10.10.10.2    266
       10.10.10.7  255.255.255.255         On-link        10.10.10.2    266
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      192.168.1.0    255.255.255.0         On-link      192.168.1.85    281
     192.168.1.85  255.255.255.255         On-link      192.168.1.85    281
    192.168.1.255  255.255.255.255         On-link      192.168.1.85    281
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link        10.10.10.2    266
        224.0.0.0        240.0.0.0         On-link      192.168.1.85    281
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link        10.10.10.2    266
  255.255.255.255  255.255.255.255         On-link      192.168.1.85    281
===========================================================================
Persistent Routes:
  None

IPv6 Route Table
< --- output omitted --- >
Command route CHANGE is used to modify gateway and/or metric only.
                                                          +50 metric change
                 network       mask    interface         /
C:\>route CHANGE 0.0.0.0 MASK 0.0.0.0 10.10.10.2 METRIC 50 IF 13
                                                               \interface number from Interface List
Verification

METRIC has been added +50 and it is now 60. The default gateway is now 192.168.1.254 that belongs to my WLAN card has metric lower cost then Ethernet connection.

C:\>route print
< --- output omitted --- >
 IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0    192.168.1.254     192.168.1.85     25
          0.0.0.0          0.0.0.0         10.0.0.2       10.10.10.2     60
       10.10.10.0  255.255.255.248         On-link        10.10.10.2    266
       10.10.10.2  255.255.255.255         On-link        10.10.10.2    266
       10.10.10.7  255.255.255.255         On-link        10.10.10.2    266
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      192.168.1.0    255.255.255.0         On-link      192.168.1.85    281
     192.168.1.85  255.255.255.255         On-link      192.168.1.85    281
    192.168.1.255  255.255.255.255         On-link      192.168.1.85    281
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link        10.10.10.2    266
        224.0.0.0        240.0.0.0         On-link      192.168.1.85    281
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link        10.10.10.2    266
  255.255.255.255  255.255.255.255         On-link      192.168.1.85    281
===========================================================================
Persistent Routes:
  None
 < --- output omitted --- >

Enable IP routing in Windows 7

This procedure should apply to other Windows OS incl. 2000/Vista/8 but it has been verified only on Win7.

  1. Open regedit as Admin
  2. Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\"
  3. Change IPEnableRouter to 1
  4. Run services->Routing and Remote->start

Reboot was not necessary after starting the service but please reboot first if it does not work.

Verify
ipconfig /all
Windows IP Configuration 

   Host Name . . . . . . . . . . . . : IP-C0#####0
   Primary Dns Suffix  . . . . . . . : corp.amazonworkspaces.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : eu-####-1.ec2-utilities.amazonaws.com
                                       us-####-1.ec2-utilities.amazonaws.com
                                       ec2.internal
                                       eu-####-1.compute.internal
                                       corp.amazonworkspaces.com
                                       amazonworkspaces.com
<--- output omitted ----->